It appears that cb, [EMAIL PROTECTED], wrote: >You say it is set for DHCP but double check anyway.
Properly set. >Connect Via popup is set for the wireless card Properly set. >Are you getting an IP address? If so, what is it? 192.168.1.116 >are you getting all info filled in On this try, I get only the IP address, and for the rest it says, "not available." On the last try, I got: IP Address 192.168.1.116 Subnet Mask 255.255.255.0 Router Address 192.168.1.1 Name Server Address 192.168.1.1 but still no connection. I tried to select "connect manually," I entered all these numbers, but still no connection. When I try to connect, it says: With iCab, xxxx is currently unavailable. With Explorer, The attempt to load xxxx failed. With Emailer, Could not resolve domain name because no data was available for reading. >If you are getting an IP address, can you ping the router, >if you can ping the router, can you ping the DNS servers? What is this? How do I try it? >verify that your wireless settings are correct. You have >connecting to the correct SSID and you have entered >the correct encryption method and entered the correct keys >or passphrase as needed. Verified. Correct SSID (at home, the only one available, open - no encryptation). On many road trips while it was working OK, I was able to find every signal everywhere and connect instantly. Now on the road I can find all the signals but not connect. If encrypted I am given the passphrase but cannot connect. Yet the Control Panel for the PCMCIA card shows that I am connected to a strong signal. The fact that the trouble exists with two machines would seem to eliminate a lot of possible things. Both working at the same time, or both not working at the same time. Thanks for getting back to me. There must be a way to lick this. If the Emailer list doesn't get me out of it within a few days, I'll look for a local guru. Best regards, Bill _______________________________oOo______________________________ William D. Bandes [EMAIL PROTECTED] Zephyr Cove NV USA ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
