The thing is, I'm using a single machine, like the VM, and the EMANE manual for 0.8.1 states that "Any modern Linux installation with lxc Linux Container support running the latest EMANE release will be able to execute the EMANE User Manual demonstrations."
I'll try the two-node experiment, but I have one other outstanding issue…when I do start my experiments, I'll require the commeffect controller, but that seems to be missing from my installation. If I try to use it, EMANE complains about libcommeffectshim.so not existing. Indeed, no such file exists on my system; I believe it should be located in /usr/lib64, correct? I installed using the f18.x86_64 packages, if that's of any relevance... ~James ___________________________________________ James B. Morris Dept. of Electrical, Computer, and Systems Engineering [email protected] JEC 6212 Rensselaer Polytechnic Institute 110 8th St. Troy, NY 12180-3590 On Jul 17, 2013, at 9:48 PM, Steven Galgano <[email protected]> wrote: > James, > > LXC containers are used by the emane demonstrations to provide network > stack isolation. Network stack isolation is required to route traffic > between NEMs using the virtual interfaces created by emanetransportd > (emane0 interfaces). We use large testbeds that run one instance of > emane and emanetransportd per physical machine, other testbeds that run > full VMs - each running one instance of emane and emanetransportd, and > other testbeds that use LXC containers. > > The demonstrations were never intended to be used as a testbed > experiment control system. Their purpose is to allow training attendees > to gain hands on experience using emane without worrying about the > details of experiment deployment. > > You can verify correct installation by setting up a simple two NEM > experiment using the method most appropriate for your testbed in order > to supply the required network stack isolation. The demonstrations can > act as a guide for configuring emane XML. > > -- > Steven Galgano > Adjacent Link LLC > www.adjacentlink.com > > > > On 07/17/2013 08:19 PM, J. Morris wrote: >> Still trying to get emane functioning, using the VM demos as a litmus. >> I can run a demo, getting the the linux containers running, and I can >> connect to one via SSH and ping others, but, as seen in the forwarded >> text, "ps ax" reveals no emane, emanetransportd, or olsrd processes >> running, as they are on the demo VM. >> >> Am I perhaps going to too much trouble? I'm only concerned with the >> demos as evidence of a working installation; if I can have that without >> working demos, that's all I'm after… >> >> ___________________________________________ >> James B. Morris >> Dept. of Electrical, Computer, and Systems Engineering >> >> [email protected] <mailto:[email protected]> >> JEC 6212 >> Rensselaer Polytechnic Institute >> 110 8th St. >> Troy, NY 12180-3590 >
_______________________________________________ emane-users mailing list [email protected] http://pf.itd.nrl.navy.mil/mailman/listinfo/emane-users
