Bugs item #1735431, was opened at 2007-06-11 18:38 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=1735431&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: EMC2 G-code Interpreter Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Pete Vavaroutsos (petev) Assigned to: Nobody/Anonymous (nobody) Summary: Step does not work properly after verify Initial Comment: After verifying a g-code program, stepping the program does not work properly. This behavior can be duplicated with the attached files using the following steps in TkEmc: 1) Get to machine on with all axis homed. 2) Open attached program. 3) Verify attached program. 4) Try to step program. 5) Press abort. 6) Open attached program again. 7) Try to step program. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=1735431&group_id=6744 ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
