Bugs item #2006985, was opened at 2008-06-30 17:48 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2006985&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: EMC2 Installation, packages Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: Error when settin up machine configuration Initial Comment: Here is the error code Print file information: RUN_IN_PLACE=no EMC2_DIR= EMC2_BIN_DIR=/usr/bin EMC2_TCL_DIR=/usr/share/emc/tcl EMC2_SCRIPT_DIR= EMC2_RTLIB_DIR=/usr/realtime-2.6.24-16-rtai/modules/emc2 EMC2_CONFIG_DIR= EMC2_LANG_DIR=/usr/share/emc/tcl/msgs INIVAR=/usr/bin/inivar HALCMD=/usr/bin/halcmd EMC2_EMCSH=/usr/bin/emcsh EMC2_IOSH=/usr/bin/iosh EMC2 - 2.2.5 Machine configuration directory is '/home/johnnie/emc2/configs/sim' Machine configuration file is 'axis.ini' INIFILE=/home/johnnie/emc2/configs/sim/axis.ini PARAMETER_FILE=sim.var EMCMOT=motmod EMCIO=io TASK=milltask HALUI=halui DISPLAY=axis NML_FILE=emc.nml Starting EMC2... Starting EMC2 server program: emcsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Realtime system did not load Shutting down and cleaning up EMC2... Killing task emcsvr, PID=11482 Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Cleanup done Kernel message information: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fef5000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fef5000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 126MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 261856 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 261856 [ 0.000000] On node 0 totalpages: 261856 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 253 pages used for memmap [ 0.000000] HighMem zone: 32227 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6C20 checksum 0 [ 0.000000] ACPI: RSDP 000F6C20, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 3FEE702E, 005C (r1 IBM TP-1Y 1050 LTP 0) [ 0.000000] ACPI: FACP 3FEE7100, 00F4 (r3 IBM TP-1Y 1050 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3FEE72E7, DACC (r1 IBM TP-1Y 1050 MSFT 100000E) [ 0.000000] ACPI: FACS 3FEF6000, 0040 [ 0.000000] ACPI: SSDT 3FEE72B4, 0033 (r1 IBM TP-1Y 1050 MSFT 100000E) [ 0.000000] ACPI: ECDT 3FEF4DB3, 0052 (r1 IBM TP-1Y 1050 IBM 1) [ 0.000000] ACPI: TCPA 3FEF4E05, 0032 (r1 IBM TP-1Y 1050 PTL 1) [ 0.000000] ACPI: APIC 3FEF4E37, 005A (r1 IBM TP-1Y 1050 IBM 1) [ 0.000000] ACPI: MCFG 3FEF4E91, 003E (r1 IBM TP-1Y 1050 IBM 1) [ 0.000000] ACPI: BOOT 3FEF4FD8, 0028 (r1 IBM TP-1Y 1050 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259811 [ 0.000000] Kernel command line: root=UUID=455be50f-04c1-4f30-8b03-4bc1f94ebb8d ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1862.195 MHz processor. [ 3.767636] Console: colour VGA+ 80x25 [ 3.767640] console [tty0] enabled [ 3.767931] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 3.768324] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 3.796654] Memory: 1025912k/1047424k available (2177k kernel code, 20864k reserved, 1006k data, 368k init, 129920k highmem) [ 3.796662] virtual kernel memory layout: [ 3.796663] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 3.796664] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 3.796665] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 3.796666] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 3.796667] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 3.796669] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 3.796670] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 3.796673] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 3.796706] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 3.876601] Calibrating delay using timer specific routine.. 3728.29 BogoMIPS (lpj=7456595) [ 3.876624] Security Framework initialized [ 3.876631] SELinux: Disabled at boot. [ 3.876644] AppArmor: AppArmor initialized [ 3.876647] Failure registering capabilities with primary security module. [ 3.876655] Mount-cache hash table entries: 512 [ 3.876766] Initializing cgroup subsys ns [ 3.876771] Initializing cgroup subsys cpuacct [ 3.876780] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 00000000 [ 3.876791] CPU: L1 I cache: 32K, L1 D cache: 32K [ 3.876793] CPU: L2 cache: 2048K [ 3.876795] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000180 00000000 00000000 00000000 [ 3.876804] Compat vDSO mapped to ffffe000. [ 3.876814] Checking 'hlt' instruction... OK. [ 3.892925] SMP alternatives: switching to UP code [ 3.894623] Freeing SMP alternatives: 11k freed [ 3.894719] Early unpacking initramfs... done [ 4.239166] ACPI: Core revision 20070126 [ 4.239270] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 4.255900] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 4.255924] Total of 1 processors activated (3728.29 BogoMIPS). [ 4.256123] ENABLING IO-APIC IRQs [ 4.256308] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 4.403806] Brought up 1 CPUs [ 4.403832] CPU0 attaching sched-domain: [ 4.403834] domain 0: span 01 [ 4.403836] groups: 01 [ 4.403979] net_namespace: 64 bytes [ 4.403985] Booting paravirtualized kernel on bare hardware [ 4.404403] Time: 16:56:15 Date: 06/30/08 [ 4.404425] NET: Registered protocol family 16 [ 4.404593] EISA bus registered [ 4.404618] ACPI: bus type pci registered [ 4.404818] PCI: PCI BIOS revision 2.10 entry at 0xfd8f7, last bus=7 [ 4.404820] PCI: Using configuration type 1 [ 4.404826] Setting up standard PCI resources [ 4.408432] ACPI: EC: EC description table is found, configuring boot EC [ 4.413702] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 4.416808] ACPI: Interpreter enabled [ 4.416811] ACPI: (supports S0 S3 S4 S5) [ 4.416823] ACPI: Using IOAPIC for interrupt routing [ 4.423640] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 4.423643] ACPI: EC: driver started in poll mode [ 4.423782] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 4.424483] Force enabled HPET at base address 0xfed00000 [ 4.424489] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 4.424493] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 4.425227] PCI: Transparent bridge - 0000:00:1e.0 [ 4.425308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 4.425459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 4.425566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 4.425679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 4.425794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 4.428885] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 4.429073] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 4.429258] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 4.429443] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 4.429627] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 4.429812] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 4.429996] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 4.430181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 4.430326] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 4.430410] ACPI: Power Resource [PUBS] (on) [ 4.430451] Linux Plug and Play Support v0.97 (c) Adam Belay [ 4.430481] pnp: PnP ACPI init [ 4.430487] ACPI: bus type pnp registered [ 4.431537] pnpacpi: exceeded the max number of mem resources: 12 [ 4.433847] pnp: PnP ACPI: found 14 devices [ 4.433849] ACPI: ACPI bus type pnp unregistered [ 4.433852] PnPBIOS: Disabled by ACPI PNP [ 4.434039] PCI: Using ACPI for IRQ routing [ 4.434041] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 4.467676] NET: Registered protocol family 8 [ 4.467678] NET: Registered protocol family 20 [ 4.467821] hpet clockevent registered [ 4.467828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 4.467832] hpet0: 3 64-bit timers, 14318180 Hz [ 4.468863] AppArmor: AppArmor Filesystem Enabled [ 4.471663] Time: tsc clocksource has been installed. [ 4.479681] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 4.479684] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 4.479687] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 4.479690] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 4.479692] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 4.479695] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 4.479698] system 00:00: iomem range 0x0-0x0 could not be reserved [ 4.479700] system 00:00: iomem range 0x0-0x0 could not be reserved [ 4.479703] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 4.479705] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 4.479708] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 4.479711] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 4.479717] system 00:02: ioport range 0x1000-0x107f has been reserved [ 4.479719] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 4.479722] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 4.479724] system 00:02: ioport range 0x1600-0x1641 has been reserved [ 4.479727] system 00:02: ioport range 0x1644-0x167f has been reserved [ 4.479730] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 4.479733] system 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved [ 4.479736] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 4.479739] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 4.479742] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved [ 4.510057] PCI: Bridge: 0000:00:01.0 [ 4.510059] IO window: 3000-3fff [ 4.510062] MEM window: a8100000-a81fffff [ 4.510065] PREFETCH window: c0000000-c7ffffff [ 4.510068] PCI: Bridge: 0000:00:1c.0 [ 4.510070] IO window: disabled. [ 4.510075] MEM window: a8200000-a82fffff [ 4.510079] PREFETCH window: disabled. [ 4.510084] PCI: Bridge: 0000:00:1c.2 [ 4.510087] IO window: 4000-4fff [ 4.510092] MEM window: a8300000-a83fffff [ 4.510097] PREFETCH window: c8000000-c80fffff [ 4.510104] PCI: Bus 5, cardbus bridge: 0000:04:00.0 [ 4.510106] IO window: 00005000-000050ff [ 4.510111] IO window: 00005400-000054ff [ 4.510116] PREFETCH window: d0000000-d3ffffff [ 4.510121] MEM window: ac000000-afffffff [ 4.510126] PCI: Bridge: 0000:00:1e.0 [ 4.510129] IO window: 5000-8fff [ 4.510134] MEM window: a8400000-b7ffffff [ 4.510138] PREFETCH window: d0000000-d7ffffff [ 4.510154] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.510159] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 4.510179] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 17 [ 4.510184] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 4.510206] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 [ 4.510211] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 4.510223] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 4.510240] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.510252] NET: Registered protocol family 2 [ 4.547596] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 4.547802] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.548517] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 4.548945] TCP: Hash tables configured (established 131072 bind 65536) [ 4.548948] TCP reno registered [ 4.559668] checking if image is initramfs... it is [ 4.970875] Switched to high resolution mode on CPU 0 [ 5.231815] Freeing initrd memory: 7731k freed [ 5.232016] Simple Boot Flag at 0x35 set to 0x1 [ 5.232397] audit: initializing netlink socket (disabled) [ 5.232413] audit(1214844975.324:1): initialized [ 5.232574] highmem bounce pool size: 64 pages [ 5.234296] VFS: Disk quotas dquot_6.5.1 [ 5.234367] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.234515] io scheduler noop registered [ 5.234517] io scheduler anticipatory registered [ 5.234519] io scheduler deadline registered [ 5.234530] io scheduler cfq registered (default) [ 5.234623] Boot video device is 0000:01:00.0 [ 5.234734] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 5.234762] assign_interrupt_mode Found MSI capability [ 5.234787] Allocate Port Service[0000:00:01.0:pcie00] [ 5.234856] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 5.234907] assign_interrupt_mode Found MSI capability [ 5.234948] Allocate Port Service[0000:00:1c.0:pcie00] [ 5.234980] Allocate Port Service[0000:00:1c.0:pcie02] [ 5.235068] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 5.235119] assign_interrupt_mode Found MSI capability [ 5.235160] Allocate Port Service[0000:00:1c.2:pcie00] [ 5.235189] Allocate Port Service[0000:00:1c.2:pcie02] [ 5.235411] isapnp: Scanning for PnP cards... [ 5.589873] isapnp: No Plug & Play device found [ 5.614026] Real Time Clock Driver v1.12ac [ 5.614125] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 5.615078] serial 00:0a: activated [ 5.615291] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 5.615461] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 23 (level, low) -> IRQ 19 [ 5.615471] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 5.616033] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 5.616095] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 5.616183] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.624418] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.624422] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.633765] mice: PS/2 mouse device common for all mice [ 5.633861] EISA: Probing bus 0 at eisa.0 [ 5.633867] Cannot allocate resource for EISA slot 1 [ 5.633870] Cannot allocate resource for EISA slot 2 [ 5.633872] Cannot allocate resource for EISA slot 3 [ 5.633874] Cannot allocate resource for EISA slot 4 [ 5.633876] Cannot allocate resource for EISA slot 5 [ 5.633878] Cannot allocate resource for EISA slot 6 [ 5.633880] Cannot allocate resource for EISA slot 7 [ 5.633881] Cannot allocate resource for EISA slot 8 [ 5.633883] EISA: Detected 0 cards. [ 5.633886] cpuidle: using governor ladder [ 5.633888] cpuidle: using governor menu [ 5.633970] NET: Registered protocol family 1 [ 5.633993] Using IPI No-Shortcut mode [ 5.634022] registered taskstats version 1 [ 5.634118] Magic number: 12:841:945 [ 5.634127] hash matches device ttya0 [ 5.634168] hash matches device tty2 [ 5.634186] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.634188] EDD information not available. [ 5.634359] Freeing unused kernel memory: 368k freed [ 5.638248] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 6.821004] fuse init (API version 7.9) [ 6.839510] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 6.839516] ACPI: Processor [CPU] (supports 8 throttling states) [ 6.841219] ACPI: Thermal Zone [THM0] (66 C) [ 7.431239] usbcore: registered new interface driver usbfs [ 7.431264] usbcore: registered new interface driver hub [ 7.435431] usbcore: registered new device driver usb [ 7.442740] tg3.c:v3.86 (November 9, 2007) [ 7.442764] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.442777] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 7.451070] USB Universal Host Controller Interface driver v3.0 [ 7.546461] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:15:54:69 [ 7.546468] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 7.546471] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 7.546496] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.546511] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 7.546515] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.546839] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 7.546871] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 7.546994] usb usb1: configuration #1 chosen from 1 choice [ 7.547017] hub 1-0:1.0: USB hub found [ 7.547022] hub 1-0:1.0: 2 ports detected [ 7.626576] SCSI subsystem initialized [ 7.650434] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 20 [ 7.650445] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 7.650450] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.650477] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 7.650506] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820 [ 7.650605] usb usb2: configuration #1 chosen from 1 choice [ 7.650627] hub 2-0:1.0: USB hub found [ 7.650632] hub 2-0:1.0: 2 ports detected [ 7.662636] libata version 3.00 loaded. [ 7.754270] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 7.754283] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 7.754287] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.754309] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 7.754338] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840 [ 7.754440] usb usb3: configuration #1 chosen from 1 choice [ 7.754462] hub 3-0:1.0: USB hub found [ 7.754467] hub 3-0:1.0: 2 ports detected [ 7.762193] Floppy drive(s): fd0 is 1.44M [ 7.781331] FDC 0 is a National Semiconductor PC87306 [ 7.858087] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 22 [ 7.858099] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 7.858103] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.858124] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 7.858154] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001860 [ 7.858261] usb usb4: configuration #1 chosen from 1 choice [ 7.858288] hub 4-0:1.0: USB hub found [ 7.858293] hub 4-0:1.0: 2 ports detected [ 7.889941] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 7.962862] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 22 [ 7.962876] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.962880] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.962904] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 7.966820] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.966826] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.966832] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xa8000000 [ 8.014433] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 8.014553] usb usb5: configuration #1 chosen from 1 choice [ 8.014576] hub 5-0:1.0: USB hub found [ 8.014582] hub 5-0:1.0: 8 ports detected [ 8.123323] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 8.129837] ahci 0000:00:1f.2: version 3.0 [ 8.129853] ahci: probe of 0000:00:1f.2 failed with error -22 [ 8.139946] ata_piix 0000:00:1f.2: version 2.12 [ 8.139951] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 8.293992] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 8.294066] scsi0 : ata_piix [ 8.294212] scsi1 : ata_piix [ 8.295063] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 [ 8.295066] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 [ 8.409067] usb 1-1: device not accepting address 2, error -71 [ 8.457345] ata1.00: ATA-6: FUJITSU MHV2100AH, 00000096, max UDMA/100 [ 8.457348] ata1.00: 195371568 sectors, multi 16: LBA [ 8.457351] ata1.00: applying bridge limits [ 8.460977] Clocksource tsc unstable (delta = -19045551013 ns) [ 8.464966] Time: hpet clocksource has been installed. [ 8.465700] ata1.00: configured for UDMA/100 [ 8.474139] ata2.00: ATA-6: TOSHIBA MK4026GAX RoHS, PA107E, max UDMA/100 [ 8.474142] ata2.00: 78140160 sectors, multi 16: LBA [ 8.475534] ata2.00: configured for UDMA/100 [ 8.475631] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100A 0000 PQ: 0 ANSI: 5 [ 8.475907] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK4026GA PA10 PQ: 0 ANSI: 5 [ 8.486106] Driver 'sd' needs updating - please use bus_type methods [ 8.486175] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 8.486186] sd 0:0:0:0: [sda] Write Protect is off [ 8.486188] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.486203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.486243] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 8.486252] sd 0:0:0:0: [sda] Write Protect is off [ 8.486254] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.486268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.486271] sda:<6>usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 8.525829] usb 5-1: configuration #1 chosen from 1 choice [ 8.525976] hub 5-1:1.0: USB hub found [ 8.526311] hub 5-1:1.0: 4 ports detected [ 8.546606] sda1 [ 8.546659] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.546712] sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB) [ 8.546723] sd 1:0:0:0: [sdb] Write Protect is off [ 8.546726] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.546741] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.546776] sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB) [ 8.546785] sd 1:0:0:0: [sdb] Write Protect is off [ 8.546787] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.546802] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.546805] sdb: sdb1 sdb2 < sdb5 > [ 8.577604] sd 1:0:0:0: [sdb] Attached SCSI disk [ 8.586247] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.586264] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 8.684715] usb 5-1.3: new high speed USB device using ehci_hcd and address 4 [ 8.716845] Attempting manual resume [ 8.716848] swsusp: Resume From Partition 8:21 [ 8.716849] PM: Checking swsusp image. [ 8.717006] PM: Resume from disk failed. [ 8.733142] usb 5-1.3: configuration #1 chosen from 1 choice [ 8.747390] kjournald starting. Commit interval 5 seconds [ 8.747400] EXT3-fs: mounted filesystem with ordered data mode. [ 8.810230] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 8.832735] usb 3-2: configuration #1 chosen from 1 choice [ 8.888732] usb 5-1.2: new low speed USB device using ehci_hcd and address 5 [ 8.912764] usb 5-1.2: configuration #1 chosen from 1 choice [ 8.913040] usbcore: registered new interface driver libusual [ 9.000425] Initializing USB Mass Storage driver... [ 9.000481] scsi2 : SCSI emulation for USB Mass Storage devices [ 9.000538] usbcore: registered new interface driver usb-storage [ 9.000541] USB Mass Storage support registered. [ 9.000607] usb-storage: device found at 4 [ 9.000609] usb-storage: waiting for device to settle before scanning [ 9.681780] usb-storage: device scan complete [ 9.682051] scsi 2:0:0:0: Direct-Access Insignia Pilot Player 1.00 PQ: 0 ANSI: 0 [ 9.683391] scsi 2:0:0:1: Direct-Access Insignia Pilot Player 1.00 PQ: 0 ANSI: 0 [ 9.684085] sd 2:0:0:0: [sdc] 7823360 512-byte hardware sectors (4006 MB) [ 9.684308] sd 2:0:0:0: [sdc] Write Protect is off [ 9.684311] sd 2:0:0:0: [sdc] Mode Sense: 37 00 00 08 [ 9.684313] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.685422] sd 2:0:0:0: [sdc] 7823360 512-byte hardware sectors (4006 MB) [ 9.685642] sd 2:0:0:0: [sdc] Write Protect is off [ 9.685644] sd 2:0:0:0: [sdc] Mode Sense: 37 00 00 08 [ 9.685646] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 9.685649] sdc: [ 9.687919] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 9.687949] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 9.688557] sd 2:0:0:1: [sdd] 7863584 512-byte hardware sectors (4026 MB) [ 9.688833] sd 2:0:0:1: [sdd] Write Protect is off [ 9.688835] sd 2:0:0:1: [sdd] Mode Sense: 37 00 00 08 [ 9.688837] sd 2:0:0:1: [sdd] Assuming drive cache: write through [ 9.690091] sd 2:0:0:1: [sdd] 7863584 512-byte hardware sectors (4026 MB) [ 9.690314] sd 2:0:0:1: [sdd] Write Protect is off [ 9.690317] sd 2:0:0:1: [sdd] Mode Sense: 37 00 00 08 [ 9.690318] sd 2:0:0:1: [sdd] Assuming drive cache: write through [ 9.690321] sdd: sdd1 [ 9.691417] sdd: p1 exceeds device capacity [ 9.691455] sd 2:0:0:1: [sdd] Attached SCSI removable disk [ 9.691481] sd 2:0:0:1: Attached scsi generic sg3 type 0 [ 11.317930] attempt to access beyond end of device [ 11.317935] sdd: rw=0, want=7959432, limit=7863584 [ 11.317938] Buffer I/O error on device sdd1, logical block 993904 [ 11.317942] attempt to access beyond end of device [ 11.317944] sdd: rw=0, want=7959432, limit=7863584 [ 11.317946] Buffer I/O error on device sdd1, logical block 993904 [ 11.317954] attempt to access beyond end of device [ 11.317956] sdd: rw=0, want=7959544, limit=7863584 [ 11.317958] Buffer I/O error on device sdd1, logical block 993918 [ 11.317961] attempt to access beyond end of device [ 11.317963] sdd: rw=0, want=7959544, limit=7863584 [ 11.317965] Buffer I/O error on device sdd1, logical block 993918 [ 11.318004] attempt to access beyond end of device [ 11.318006] sdd: rw=0, want=7959552, limit=7863584 [ 11.318008] Buffer I/O error on device sdd1, logical block 993919 [ 11.318025] attempt to access beyond end of device [ 11.318027] sdd: rw=0, want=7959552, limit=7863584 [ 11.318029] Buffer I/O error on device sdd1, logical block 993919 [ 11.318036] attempt to access beyond end of device [ 11.318038] sdd: rw=0, want=7959552, limit=7863584 [ 11.318040] Buffer I/O error on device sdd1, logical block 993919 [ 11.318045] attempt to access beyond end of device [ 11.318047] sdd: rw=0, want=7959552, limit=7863584 [ 11.318049] Buffer I/O error on device sdd1, logical block 993919 [ 11.318054] attempt to access beyond end of device [ 11.318056] sdd: rw=0, want=7959552, limit=7863584 [ 11.318058] Buffer I/O error on device sdd1, logical block 993919 [ 11.318064] attempt to access beyond end of device [ 11.318066] sdd: rw=0, want=7959552, limit=7863584 [ 11.318068] Buffer I/O error on device sdd1, logical block 993919 [ 11.318073] attempt to access beyond end of device [ 11.318075] sdd: rw=0, want=7959552, limit=7863584 [ 11.318081] attempt to access beyond end of device [ 11.318083] sdd: rw=0, want=7959496, limit=7863584 [ 11.318088] attempt to access beyond end of device [ 11.318090] sdd: rw=0, want=7959544, limit=7863584 [ 11.318095] attempt to access beyond end of device [ 11.318097] sdd: rw=0, want=7959552, limit=7863584 [ 11.318102] attempt to access beyond end of device [ 11.318104] sdd: rw=0, want=7959552, limit=7863584 [ 11.464966] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.509745] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.556671] Linux agpgart interface v0.102 [ 12.011481] input: Power Button (FF) as /devices/virtual/input/input2 [ 12.023011] ACPI: Power Button (FF) [PWRF] [ 12.023106] input: Lid Switch as /devices/virtual/input/input3 [ 12.031879] ACPI: Lid Switch [LID] [ 12.031940] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 12.043803] ACPI: Sleep Button (CM) [SLPB] [ 13.127363] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input5 [ 13.141922] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 13.405147] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 13.589177] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes. [ 13.589215] [fglrx] ASYNCIO init succeed! [ 13.589727] [fglrx] PAT is enabled successfully! [ 13.590580] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 13.645581] ACPI: AC Adapter [AC] (on-line) [ 13.703693] ACPI: Battery Slot [BAT0] (battery present) [ 14.148205] iTCO_vendor_support: vendor-support=0 [ 14.165201] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 14.165299] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 14.165342] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 14.367296] intel_rng: FWH not detected [ 14.675361] Yenta: CardBus bridge found at 0000:04:00.0 [1014:056c] [ 14.711238] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 14.803777] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 14.803782] Socket status: 30000006 [ 14.803786] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff [ 14.803789] cs: IO port probe 0x5000-0x8fff: clean. [ 14.804710] pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff [ 14.804713] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff [ 14.930878] wlan: 0.9.4 [ 15.014722] ath_pci: 0.9.4 [ 15.014787] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 15.712694] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 15.800308] usbcore: registered new interface driver hiddev [ 15.801998] input: HID 062a:0000 as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.2/5-1.2:1.0/input/input7 [ 15.817830] input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.7-1.2 [ 15.817845] usbcore: registered new interface driver usbhid [ 15.817848] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 16.439247] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 16.439252] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 16.482915] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 16.507434] Non-volatile memory driver v1.2 [ 16.580596] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 16.580600] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 16.580601] thinkpad_acpi: ThinkPad BIOS 1YET43WW (1.05 ), EC 1YHT26WW-1.03 [ 16.580604] thinkpad_acpi: IBM ThinkPad T43 [ 16.584200] thinkpad_acpi: another device driver is already handling bay events [ 16.584203] thinkpad_acpi: disabling subdriver bay [ 16.586801] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode [ 16.586957] input: ThinkPad Extra Buttons as /devices/virtual/input/input9 [ 16.617490] irda_init() [ 16.617504] NET: Registered protocol family 23 [ 16.648241] ath_rate_sample: 1.2 (0.9.4) [ 16.649156] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 16.649162] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 16.649166] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 16.649174] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 16.649178] wifi0: mac 5.9 phy 4.3 radio 3.6 [ 16.649182] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 16.649183] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 16.649185] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 16.649187] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 16.649189] wifi0: Use hw queue 8 for CAB traffic [ 16.649191] wifi0: Use hw queue 9 for beacons [ 16.685941] nsc-ircc 00:0c: activated [ 16.685946] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 16.685991] printk: 5 messages suppressed. [ 16.685993] nsc-ircc, chip->init [ 16.706278] wifi0: Atheros 5212: mem=0xa8400000, irq=23 [ 16.780754] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 22 (level, low) -> IRQ 18 [ 16.780775] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 17.702091] intel8x0_measure_ac97_clock: measured 55498 usecs [ 17.702096] intel8x0: clocking to 48000 [ 17.733639] cs: IO port probe 0x100-0x3af: clean. [ 17.735336] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 17.736037] cs: IO port probe 0x820-0x8ff: clean. [ 17.736630] cs: IO port probe 0xc00-0xcf7: clean. [ 17.737367] cs: IO port probe 0xa00-0xaff: clean. [ 18.009309] lp: driver loaded but no devices found [ 18.038645] Adding 1646620k swap on /dev/sdb5. Priority:-1 extents:1 across:1646620k [ 18.126603] EXT3 FS on sdb1, internal journal [ 18.183493] device-mapper: uevent: version 1.0.3 [ 18.183521] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] [ 18.621360] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.857899] ACPI: ACPI Dock Station Driver [ 18.936802] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 18.936809] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 18.936839] ACPI: Error installing bay notify handler [ 18.936843] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 19.616927] IBM machine detected. Enabling interrupts during APM calls. [ 19.616933] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 19.616935] apm: overridden by ACPI. [ 19.632322] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 19.693208] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10 [ 19.757400] ppdev: user-space parallel port driver [ 19.799340] audit(1214845021.763:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5173 profile="/usr/sbin/cupsd" namespace="default" [ 50.100871] Marking TSC unstable due to: cpufreq changes. [ 51.356435] attempt to access beyond end of device [ 51.356447] sdd: rw=0, want=7959432, limit=7863584 [ 51.356452] printk: 4 messages suppressed. [ 51.356457] Buffer I/O error on device sdd1, logical block 993904 [ 51.357301] attempt to access beyond end of device [ 51.357309] sdd: rw=0, want=7959432, limit=7863584 [ 51.357315] Buffer I/O error on device sdd1, logical block 993904 [ 51.357921] attempt to access beyond end of device [ 51.357929] sdd: rw=0, want=7959544, limit=7863584 [ 51.357934] Buffer I/O error on device sdd1, logical block 993918 [ 51.358523] attempt to access beyond end of device [ 51.358530] sdd: rw=0, want=7959544, limit=7863584 [ 51.358535] Buffer I/O error on device sdd1, logical block 993918 [ 51.359214] attempt to access beyond end of device [ 51.359221] sdd: rw=0, want=7959552, limit=7863584 [ 51.359644] attempt to access beyond end of device [ 51.359651] sdd: rw=0, want=7959552, limit=7863584 [ 51.360050] attempt to access beyond end of device [ 51.360057] sdd: rw=0, want=7959552, limit=7863584 [ 51.360455] attempt to access beyond end of device [ 51.360462] sdd: rw=0, want=7959552, limit=7863584 [ 51.360858] attempt to access beyond end of device [ 51.360865] sdd: rw=0, want=7959552, limit=7863584 [ 51.361367] attempt to access beyond end of device [ 51.361375] sdd: rw=0, want=7959552, limit=7863584 [ 51.361826] attempt to access beyond end of device [ 51.361834] sdd: rw=0, want=7959552, limit=7863584 [ 51.361850] attempt to access beyond end of device [ 51.361855] sdd: rw=0, want=7959496, limit=7863584 [ 51.361867] attempt to access beyond end of device [ 51.361872] sdd: rw=0, want=7959544, limit=7863584 [ 51.361884] attempt to access beyond end of device [ 51.361888] sdd: rw=0, want=7959552, limit=7863584 [ 51.361900] attempt to access beyond end of device [ 51.361905] sdd: rw=0, want=7959552, limit=7863584 [ 22.136120] Bluetooth: Core ver 2.11 [ 22.138189] NET: Registered protocol family 31 [ 22.138193] Bluetooth: HCI device and connection manager initialized [ 22.138197] Bluetooth: HCI socket layer initialized [ 22.159796] Bluetooth: L2CAP ver 2.9 [ 22.159800] Bluetooth: L2CAP socket layer initialized [ 22.215750] Bluetooth: RFCOMM socket layer initialized [ 22.215763] Bluetooth: RFCOMM TTY layer initialized [ 22.215765] Bluetooth: RFCOMM ver 1.8 [ 52.389892] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 52.389901] tg3: eth0: Flow control is off for TX and off for RX. [ 52.949903] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.089556] NET: Registered protocol family 17 [ 58.689995] [fglrx] Reserve Block - 0 offset = 0X3ff0000 length = 0X10000 [ 58.690006] [fglrx] Reserve Block - 1 offset = 0X3fef000 length = 0X1000 [ 58.690012] [fglrx] Reserve Block - 2 offset = 0X3fee000 length = 0X1000 [ 58.690018] [fglrx] Reserve Block - 3 offset = 0X0 length = 0X40000 [ 58.690024] [fglrx] Reserve Block - 4 offset = 0X3fae000 length = 0X40000 [ 25.221736] [fglrx] interrupt source 20008000 successfully enabled [ 25.221744] [fglrx] enable ID = 0x00000004 [ 25.222023] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 25.222192] [fglrx] interrupt source 10000000 successfully enabled [ 25.222195] [fglrx] enable ID = 0x00000005 [ 25.222372] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 60.223196] NET: Registered protocol family 10 [ 60.224009] lo: Disabled Privacy Extensions [ 63.464256] ath0: no IPv6 routers present [ 63.468417] eth0: no IPv6 routers present [ 105.093636] usb 5-1.3: USB disconnect, address 4 [ 408.018928] tg3: eth0: Link is down. [ 408.018967] usb 5-1: USB disconnect, address 2 [ 408.018971] usb 5-1.2: USB disconnect, address 5 [ 413.719070] ath0: no IPv6 routers present Debug file information: insmod: can't read '/usr/realtime-2.6.24-19-generic/modules/rtai_hal.ko': No such file or directory 11482 PID TTY STAT TIME COMMAND Stopping realtime threads RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -9 NOTE: 'rtapi' kernel module must be loaded Unloading hal components RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -9 NOTE: 'rtapi' kernel module must be loaded ERROR: Module hal_lib does not exist in /proc/modules ERROR: Module rtapi does not exist in /proc/modules ERROR: Module rtai_math does not exist in /proc/modules ERROR: Module rtai_sem does not exist in /proc/modules ERROR: Module rtai_fifos does not exist in /proc/modules /usr/bin/emc_module_helper: Invalid usage with args: remove rtai_ksched Usage: /usr/bin/emc_module_helper insert /path/to/module.ext [param1=value1 ...] where module is one of: rtai_math rtai_sem rtai_shm rtai_fifos rtai_up rtai_lxrt rtai_hal rtai_sched rtai_smi rtai rt_mem_mgr adeos rtl_time rtl_sched rtl_posixio rtl_fifo rtl mbuff the path starts with one of: /lib/modules /usr/realtime and the extension is one of: .ko or the module is in the directory /usr/realtime-2.6.24-16-rtai/modules/emc2 OR /usr/bin/emc_module_helper remove module where module is one of the modules listed above. ERROR: Module rtai_hal does not exist in /proc/modules /usr/bin/emc: line 356: emc.nml: No such file or directory ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=2006985&group_id=6744 ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
