Hi Guys
Looking for opinions on Classicladder ver 7.124 in TRUNK:
Keeping in mind EMC 2.3 it's acceptable to break configs:
CL V7.124 has slightly different timers that require a small
change in the ladder program to work the same (you must
connect two ladder pins together). This allows added features
to the timer. Right now I force the added pin to act connected
But would prefer not to do that-one less thing to change
from main stream CL and you lose the added features.
CL V7.124 defaults to 15 each of hal in/out pins while
CL V7.100 had 50 each. To me 100 pins adds a lot of
clutter but any existing config that uses more then 15
pins needs a change.
There are lots of changes from V7.100, and lots of work
on the serial MODBUS routines.
any comments would be appreciated.
Thanks
Chris Morley
_________________________________________________________________
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
