Hi Chris, On 7 Dec 2008 at 18:06, Chris Morley wrote:
> > Hi Guys > > Looking for opinions on Classicladder ver 7.124 in TRUNK: > > Keeping in mind EMC 2.3 it's acceptable to break configs: > > CL V7.124 has slightly different timers that require a small > change in the ladder program to work the same (you must > connect two ladder pins together). This allows added features > to the timer. Right now I force the added pin to act connected > But would prefer not to do that-one less thing to change > from main stream CL and you lose the added features. Is the second input like an enable bit or something? What features do you loose? > > CL V7.124 defaults to 15 each of hal in/out pins while > CL V7.100 had 50 each. To me 100 pins adds a lot of > clutter but any existing config that uses more then 15 > pins needs a change. I would not change the default of 50 at this time with 2.3 on the way... > > There are lots of changes from V7.100, and lots of work > on the serial MODBUS routines. > any comments would be appreciated. > > Thanks > Chris Morley John ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
