Hi guys, I have one question about the EMC2 lathe function, or better of the G-Code programming for that. Many other controller systems use for the x axis value the diameter of the part, not the radius. If I use the diameter value at the EMC2 than I get in troubles: 1) The part is to big 20mm diameter is for EMC2 40mm diameter because 20mm radius. This problem is not so big, because here I can change the Input Scale of the x axis. 2) But this don't work if I use G02 or G03, because of the I and K value. The don't fit to the x value, attached you find a sample file (2_Stufenbolzen_unimat.nc).
At the moment I must program this part at the EMC2 software like file Radius--2_Stufenbolzen_unimat.nc Please can you help me, how I can solve this problem? Best regards Ing. Alexander Pasicznyk / technical support & QS The Cool Tool GmbH Fabriksgasse 15 2340 Moedling - Austria phone +43 - 2236 - 892 666 fax +43 - 2236 - 892 666 - 18 e-mail serv...@thecooltool.com Please visit our website www.thecooltool.com
2_Stufenbolzen_unimat.nc
Description: Binary data
Radius--2_Stufenbolzen_unimat.nc
Description: Binary data
------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
