great, thanks a lot, best wishes Alexander > -----Ursprungliche Nachricht----- > Von: Leslie Newell [mailto:l...@sheetcam.com] > Gesendet: Donnerstag, 15. Janner 2009 10:33 > An: EMC developers > Betreff: Re: [Emc-developers] EMC2 lathe function (radius/diameter) > > > This function has just been added to emc in the last few days. It isn't > available yet in a package but you can install it from source. > <http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Getti > ng_the_source_with_CVS> > > G7 switches to diameter, G8 is radius. > > Les > > The Cool Tool Ltd - Ing. Alexander Pasicznyk wrote: > > Hi guys, > > > > I have one question about the EMC2 lathe function, or better of > the G-Code > > programming for that. > > Many other controller systems use for the x axis value the > diameter of the > > part, not the radius. > > If I use the diameter value at the EMC2 than I get in troubles: > > 1) The part is to big 20mm diameter is for EMC2 40mm diameter > because 20mm > > radius. This problem is not so big, because here I can change the Input > > Scale of the x axis. > > 2) But this don't work if I use G02 or G03, because of the I > and K value. > > The don't fit to the x value, attached you find a sample file > > (2_Stufenbolzen_unimat.nc). > > > > At the moment I must program this part at the EMC2 software like file > > Radius--2_Stufenbolzen_unimat.nc > > > > Please can you help me, how I can solve this problem? > > > > Best regards > > > > Ing. Alexander Pasicznyk / technical support & QS > > The Cool Tool GmbH > > Fabriksgasse 15 > > 2340 Moedling - Austria > > phone +43 - 2236 - 892 666 > > fax +43 - 2236 - 892 666 - 18 > > e-mail serv...@thecooltool.com > > Please visit our website www.thecooltool.com > > > > > > ------------------------------------------------------------------ > ------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > >
------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
