Linuxcnc has now devices that 'Buffer' info to external boards. linuxcnc is alway in realtime control of the external devices. (atleast I don't know of any devices that work with linuxcnc that que up motion to an external device)
On Sat, 14 Apr 2012 11:08:01 -0700 Lee Studley <indigoreds...@gmail.com> wrote: > Another thought to keep in mind( and if possible ): any queing of > commands sent to an external motion controller or processor > for example " Mesa boards". Some mechanism to back up and/or flush the > queue and synchronize back > to conditions to recreate and restart at a path point from the past. > -Lee Studley > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
