On 2014-05-17 01:43, EBo wrote:
> On May 16 2014 11:14 AM, Gene Heskett wrote:
>> On Friday 16 May 2014 12:15:06 Marius Liebenberg did opine
>> And Gene did reply:
>>> Look under the High Speed Mode - up to 3.4Mb/sec
>>>
>>> http://www.esacademy.com/en/library/technical-articles-and-documents/mi
>>> scellaneous/i2c-bus.html
>>>
>> Thank you Marius.  But nowhere in that link is any mention of using
>> differential pair cabling, its all single ended all the way down.
>> There
>> may be chips that can convert it to cat5 differential pair's and
>> back. I
>> haven't researched it.  Needing to tristate them when not busy
>> complicates
>> it.
> Isn't it possible to just tie the twisted pair to a single pin (for
> noise cancellation)?  I worked with something in the past that I
> remember as having that arrangement.  Then you would not have to have
> logic for each line, but each pin.  I can see the benefit of adding
> isolation logic between the pins and cable thought...
>
>     EBo --

Not worth all the effort. I2c is not really meant for long distance 
communications but rather a protocol that is applied on the same circuit 
board or close proximity boards. It is an high speed inter device 
protocol that useses very little hardware resources (pins). My goal is 
to provide an expansion bus that can hook up several functions that are 
commonly desired by machine builders making use of just the parport. 
Things like AtoD for plasma, IO expander, pwm to analog. Mostly non 
mission critical stuff.

> ------------------------------------------------------------------------------
> "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
> Instantly run your Selenium tests across 300+ browser/OS combos.
> Get unparalleled scalability from the best Selenium testing platform available
> Simple to use. Nothing to install. Get started now for free."
> http://p.sf.net/sfu/SauceLabs
> _______________________________________________
> Emc-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-developers
>

-- 

Regards /Groete

Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064
QQ 1767394877


------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers

Reply via email to