2014-09-23 10:19 GMT+03:00 David Armstrong <[email protected]>: > Do you know if the backplot can be changed in Linuxcnc so that the drawing > rotates on B and C axis rather than the tool tip? It basically shows a path > for a machine with an articulating head rather than a trunnion table.
If I understand correctly what you are asking, then proper display of 4 or 5 axis code requires specifying additional machine and part/stock geometry. For example,imagine some code to engrave on cylindrical surface with A moves instead of Y. To display such a code properly, radius of the workpiece is required. Viesturs ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
