Viesturs, i am looking at 5 axis head as well as a trunnion type table for tilting and rotation of the workpiece as well as developing the cam postprocessor , i cant find any information on 5 axis and if any modification is needed to linuxcnc to display correctly the backplot in these cases .. , such as you mention ..
Dave On 23 September 2014 08:52, Viesturs Lācis <[email protected]> wrote: > 2014-09-23 10:19 GMT+03:00 David Armstrong <[email protected]>: > > Do you know if the backplot can be changed in Linuxcnc so that the > drawing > > rotates on B and C axis rather than the tool tip? It basically shows a > path > > for a machine with an articulating head rather than a trunnion table. > > If I understand correctly what you are asking, then proper display of > 4 or 5 axis code requires specifying additional machine and part/stock > geometry. For example,imagine some code to engrave on cylindrical > surface with A moves instead of Y. To display such a code properly, > radius of the workpiece is required. > > Viesturs > > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
