On 3 December 2014 at 13:33, Marius Liebenberg <[email protected]> wrote: > I will most likely end up doing just that as there are many conditions > to be met along the way. SO it is not just a simple move using G1 or G0. > I have to orientate the tool in a radial axis and change that at several > positions along the X axis.
Wacky idea... The correlation between axial position and rotary position could be defined by a lincurve component. (albeit that would put slight corners in the rifling in cases where the lead changes with axial position (gain-twist rifling) ) And if the HAL to define the breakpoints in the curve was a standalone file, an M-code or Python could execute that HAL code to vary the values and load a "setting" -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
