On 5 February 2015 at 14:15, Chris Radek <[email protected]> wrote: > Certainly not ignored. Whether it's a motion or an error depends on > what motion mode you're in. If in G0 or G1 it's perfectly fine; it > will apply the tool offset and then move Z, which is probably what's > intended.
It seems to always be in G0 mode. But I can't help thinking that it would be better on a separate line. N45 A0. N50 M8 N60 G0 X0.395 Y17.522 N65 G43 Z41.275 H6 N70 G0 Z31.115 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
