On Thu, 16 Jul 2015, Marius Liebenberg wrote: > Date: Thu, 16 Jul 2015 15:08:38 +0000 > From: Marius Liebenberg <[email protected]> > To: EMC developers <[email protected]>, > [email protected] > Subject: Re: [Emc-developers] Tormach PathPilot > > > >> On 07/16/2015 02:56 AM, Marius Liebenberg wrote: >> >> ... snip >> >>> Has anyone run the PathPilot software on anything other than the >>> Tormach >>> machines or tried another config? >> >> I haven't tried using PathPilot (PP) with any other equipment, but a >> few >> things come to mind. A custom firmware is loaded to a Mesa board (5 or >> 6i25) that handles a connection to a control board that uses a PIC >> microprocessor to interface some of the peripherals to PP. The .ini and >> .hal files would need to be edited to compensate for the methods used >> for the charge pump/tool number PWM signal and other signals. There are >> connection diagrams in the manuals that show the components and the >> connections: >> http://www.tormach.com/tormach_product_manuals.html >> >> Off hand, I would start with getting the .hal file load commands >> working, then edit signals to get e-stop working, then continue >> replacing or bypassing other signals. >> >> There should be a sim configuration that you can run to play with the >> UI. >> > I thought the same as you did, until I realized that I am locked out of > the OS altogether. I have not found a way in yet.
Must be possible: https://www.youtube.com/watch?v=cGr37Dn6YgM >> >> -- >> Kirk Wallace >> http://www.wallacecompany.com/machine_shop/ >> http://www.wallacecompany.com/E45/ >> >> ------------------------------------------------------------------------------ >> Don't Limit Your Business. Reach for the Cloud. >> GigeNET's Cloud Solutions provide you with the tools and support that >> you need to offload your IT needs and focus on growing your business. >> Configured For All Businesses. Start Your Cloud Today. >> https://www.gigenetcloud.com/ >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
