On Wed, 7 Oct 2015, Gene Heskett wrote: > Date: Wed, 7 Oct 2015 19:31:06 -0400 > From: Gene Heskett <[email protected]> > Reply-To: EMC developers <[email protected]> > To: EMC developers <[email protected]> > Subject: [Emc-developers] Weirdest lcnc problem yet > > Greetings all; > > My GO704 box has decided it cannot find the RTLIB modules. > > I have tried to export the path in both my own .basrc, and in > /etc/profile, but the only way to make it show up in an "env" > output is to export it from the command line of every terminal, > AND terminal window tab that I open. And even that does not help. > > It simply cannot find hm2_pci.ko according to the messages it emits as > its cleaning up. It leaves this in the window that tries to run it: > ===================================== > gene@GO704:~$ linuxcnc -l > LINUXCNC - 2.8.0-pre1-1138-gd40e5d4 > Machine configuration directory is '/home/gene/linuxcnc/configs/GO704fast' > Machine configuration file is 'GO704fast.ini' > Starting LinuxCNC... > . > Found file(REL): ./GO704fast.hal > Error: could not insert module > /usr/realtime-3.4-9-rtai-686-pae/modules/linuxcnc/hm2_pci.ko: No such device > ./GO704fast.hal:8: exit value: 1 > ./GO704fast.hal:8: insmod for hm2_pci failed, returned -1
That normally means it cannot find the FPGA card most often this is a PCI contact issue Check with lspci -vn | grep 5125 ( should print something with 2718:5125 ) occasionally its because of a marginal 3.3V ATX PS ( symptoms of this are the red lights on 5I25 staying on or blinking any time other than power up) Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
