It happens quite often for me, I only set the stop type to ramp and the
accl and decel times to 0.5 seconds. I can tell they have been reset
when the spindle takes 10 seconds to spool up. If yours never get reset
then I suspect a bad GS2. Sometimes after shutting down the LCNC
computer and sometimes out of the blue. I've reset them so often I have
memorized them. Another call to AD is in order.
JT
On 10/9/2015 5:56 PM, Tom Easterday wrote:
> Funny you asked because I was about to send a message asking what this was
> about. I haven’t EVER seen my parameters get reset to factory settings, I
> don’t think, anyway…. When does this happen? How often? What parameters
> get reset (all)? If they all got reset I would definitely notice this as a
> problem….
>
> -Tom
>
>
>
>> On Oct 9, 2015, at 5:49 PM, John Thornton <j...@gnipsel.com> wrote:
>>
>> Tom,
>>
>> Do you have any idea why a GS2 parameters get reset to factory settings
>> with the gs2 component. AD says that modbus is writing over the settings.
>>
>> JT
>>
>> On 10/9/2015 9:23 AM, Tom Easterday wrote:
>>> Ok, I think we have cleaned up the indentation. Let me know if anything is
>>> amiss…
>>> Thanks,
>>> -Tom
>>>
>>>
>>>
>>>> On Oct 5, 2015, at 11:06 PM, Sebastian Kuzminsky <s...@highlab.com> wrote:
>>>>
>>>> I looked at what I think is the latest version of your patch: 2.7,
>>>> patched with
>>>> 0003-Added-an-initialize-option-to-gs2_vfd.c-so-it-can-be.patch, patched
>>>> with Added-an-initialize-option-to-gs2_vfd.patch.
>>>>
>>>> The logic looks good to me. I like that you clear isInitialized when
>>>> disabling the GS2, so that it will be re-initialized when .enabled comes
>>>> back on.
>>>>
>>>> My only nitpick is that the indentation in the new "while (done==0) {"
>>>> main loop is inconsistent, and that makes it a bit hard to follow. Our
>>>> coding style guide (src/CodingStyle) says to use what's known as the One
>>>> True Brace Style.
>>>>
>>>> That issue aside, I tested your modified driver on my GS2, and it works
>>>> just like before, which is great. I really appreciate you maintaining
>>>> backwards compatibility, that makes life much easier for our users and
>>>> makes the patch set reasonable for the 2.7 stable branch.
>>>>
>>>> I fiddled with .enable and it seemed to do the right thing, though my
>>>> VFD does not lose power when i enter E-stop so i couldnt test that part.
>>>>
>>>> This has my welcome to go into 2.7 (though I'd like the indentation
>>>> cleaned up, as mentioned above).
>>>>
>>>>
>>>> --
>>>> Sebastian Kuzminsky
>>>>
>>>> ------------------------------------------------------------------------------
>>>> _______________________________________________
>>>> Emc-developers mailing list
>>>> Emc-developers@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/emc-developers
>>>
>>> ------------------------------------------------------------------------------
>>>
>>>
>>> _______________________________________________
>>> Emc-developers mailing list
>>> Emc-developers@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/emc-developers
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Emc-developers mailing list
>> Emc-developers@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-developers
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Emc-developers mailing list
> Emc-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-developers
------------------------------------------------------------------------------
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
