thanks i'll try it all out On 29 November 2015 at 17:28, Sebastian Kuzminsky <[email protected]> wrote:
> I've built new RTAI kernel packages for Debian Jessie, using Linux > 3.16.7 and RTAI 5.0-test1, and I'm soliciting wider testing. > > There are no debian packages of LinuxCNC for this new platform yet, but > the branch "rtai-5" in our git repo works on it. > > In order to test it, you need to install Jessie (i386) using the regular > debian.org installer, add "deb http://linuxcnc.org jessie base" to your > sources.list, install the linux-image and rtai-modules packages from > there, and reboot. Then build the rtai-5 branch of linuxcnc and let it > rip. > > I've moved my CNC Bridgeport with this combination of software and it > seems to be working well. > > > -- > Sebastian Kuzminsky > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
