> Date: Fri, 18 Dec 2015 11:10:04 -0500
> From: r...@superiorroll.com
> To: emc-developers@lists.sourceforge.net
> Subject: [Emc-developers] Tool Not Changed
>
> Hello Guys,
>
> Hey guys, just wondering how to tell the control, while in the middle of
> a tool change sequence, that the tool did not get changed. Reason I ask
> is now we are making chips on our machine, and yesterday our program had
> a tool change to a tool that was not physically in the carousel, but
> still in the tool tool table, so the machine started the tool change
> sequence, and hung up, when it did not see the tool loaded into the
> spindle.
>
> I realise that I probably should have deleted the tools in the tool
> table that are not physically in the carousel, but this would also be
> helpful if maybe during a tool change the tool fell out of the tool
> changer arm for some reason, the tool changer arm malfunctioned, the
> tool turret on a lathe malfunctioned, anything really.
>
> Just looking for a way to tell the CNC the tool change did not complete
> successfully, and possibly to perform the same operation as hitting the
> "ESC" and "F6" keys when initiated, abort a running program, reset the
> interpreter, etc.
>
> --
> Thanks
>
>
> Rick Lair
> Superior Roll & Turning LLC
> 399 East Center Street
> Petersburg MI, 49270
> PH: 734-279-1831
> FAX: 734-279-1166
> www.superiorroll.com
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Emc-developers mailing list
> Emc-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-developers
------------------------------------------------------------------------------
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
