Please do not mess thinks up! I speak about MDI mode not AUTO mode! Jogging in AUTO mode is dangerous and should not be allowed. If necessary use move off or stop the program. I agree, that run from line "is not implemented" in linuxcnc and you may know, that gmoccapy disable run from line as default!
Norbert Am 16.01.2016 um 22:53 schrieb Les Newell: >> A -- The tool is dull and we need to move to a new position and replace the >> tool with a sharp one. In that case, we might want to also touch off the >> new tool to measure it's length and also change the tool length in a tool >> table. > B -- You are cutting a stringy material such as plastic and need to stop > and clear the cutter. I have this problem quite often. > > > Being able to jog while paused is a very useful function and I would > really like to see it but it needs a fair amount of work and unless > someone steps up to the plate it isn't going to happen. However allowing > jog while in MDI mode is a relatively simple change. It also isn't that > difficult to implement an option to jog while changing tools. A few > years back I hacked the tool change code to allow this. It basically > made a note of the current line number then stopped the interpreter to > allow jogging. After the tool change it did a 'run from here' to > continue. Not an ideal solution but it worked in most cases. > >> A jog dial (MPG) works in MDI. The keyboard keys <- -> >> (and up and down arrows to select lines to recall) are used >> in the Axis screen to move around in the text entry window >> when in MDI mode. > That is interesting. Maybe I need to update from my old copy of EMC to > LinuxCNC. At least it proves there is no technical reason why you can't > jog in MDI mode. Mach handles the jog key issue in a very simple way. If > the MDI box has the focus the arrow keys etc are used for editing. If > any other control has focus, jog keys jog. It is pretty easy to > implement and works well. > > Les > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
