Greetings all; Working on a wrapper for G33 to make it a lot more universal, a sort of fill in the blanks and go do it thing, to both bore to a starting taper for a tapered thread, either internal or external. I need it ATM to make a shaft extension for one of those teeny ball screws I bought from Steve Stallings quite some time back, so it will extend into the crossfeed dial on this 11x36 Sheldon. A tighten the nut to compress the fingers of a socket onto the end of the screw, its worked well for a couple years in my expanded table HF Micro-mill. No slippage.
My fadeing mind can't come up with a code snippet that does the graduated reduction in the depth of cut as the tool is directed to cut deeper. Spring passes and all. Like G76 does it. So can I borrow what does that in the G76 routine, and if so, where can I get it by itself w/o having to pull the sources for all of it. If I can get this polished up enough, I'd like to put it in the wiki as I think it could be a handy addition to our "toolkit". Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
