If you search thru the pins for your cards in the hal configuration located in the machine menu while running linuxcnc maybe you find it.
On Thu, 19 Jan 2017 12:09:27 -0500 Curtis Dutton <curtd...@gmail.com> wrote: > I'm writing a laser rastering component, which I will share when it is > working. > > It scans across the x axis but I can't find the pin that corresponds to the > value shown in the gui for the actual X value with all offsets etc... > added. > > The joint.pos-cmd, et all... is the absolute position on the physical > joint, but I want the logical X value. > > > Is there a hal pin that exposes that value? (I'm using the axis ui) > > > Thanks, > Curt > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
