Les, the bug reported in #361 only causes a problem when more than one MDI command is issued by an external program, MDI commands issued via the MDI tab work fine.
Cheers, Kurt On Mon, Dec 4, 2017 at 9:17 AM, Les Newell <les.new...@fastmail.co.uk> wrote: > I have experienced this. In the current release it doesn't consistently > change back to manual. For instance if I issue a G0,G1,G2 or G3 it > generally switches back to manual but if I issue a M3 or M5 it generally > doesn't. > > I would really like switching back to manual to be an option. On most of > my machines I have 1 jog wheel per axis so it makes sense for the wheels to > be active at all times unless the machine is busy doing something. I do a > lot of one-offs and being able to randomly mix MDI and manual handwheel > motion can be very useful. Using Axis I can't say I have ever had a problem > with MDI commands not being executed as reported in issue #361. > > Les > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
