On Mon, 27 May 2019 at 20:10, Alec Ari via Emc-developers < emc-developers@lists.sourceforge.net> wrote:
Between kernel 3.4.55 (RTAI LinuxCNC live cd) and 3.16.52 (my old heavily > tested stable tree) -- A lot of changes are made. To my memory, Andy was > able to build the kernel and RTAI, and even load/unload modules without a > problem. I believe it would only panic if trying to run the test suite or > any real-time code. I trust LinuxCNC to start a real-time thread correctly, > and I've tried the RTAI test suite myself on numerous combinations, so this > points to hardware. > I will try that kernel again with Jessie. > The biggest problem to me is that LinuxCNC has a line splitting problem > and has trouble detecting the running kernel (it cuts things off or > something) I sent the patch to andypugh on IRC -- Can this get looked into? I don't remember this, either I missed it, or didn't understand the problem description. Any chance you can raise it as an issue on the bug tracker? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
