On 9/2/19 2:26 PM, Chris Morley wrote:
Sorry it links to the website front page not the forum.
Chris M
________________________________
From: Chris Morley <chrisinnana...@hotmail.com>
Sent: September 2, 2019 8:13 PM
To: EMC developers <emc-developers@lists.sourceforge.net>
Subject: Re: [Emc-developers] Link to docs now doesn't offer all the docs.
http://linuxcnc.org/docs/
It now links to the forum rather then the page that you could select docs from
about 2.3 to master.
https://forum.linuxcnc.org/41-guis/37225-couple-of-qtpyvcp-questions?start=20
I'm not sure why (I'm guessing) John changed it, but having less docs is not
good.
John T and I changed it - sorry if we broke something you were using!
The old docs landing page (currently available at
http://linuxcnc.org/docs/index-old.html) was hand-written, and placed on
the webserver by hand. We decided it'd be better if we used the
standard tools that are used for all the rest of our website (wlo.git
and jekyll), and we didn't consider that the old docs were still useful
to people.
I will update the new docs landing page
(https://github.com/LinuxCNC/wlo/blob/master/documents/index.md) to
include links to the old docs, hold on... Ok done!
You can change it yourself if you think it's still not correct, just
clone github.com/LinuxCNC/wlo.git and edit `documents/index.md`. There
are instructions in the wlo.git `README.md` file describing how to test
out changes locally before you push to the real site.
--
Sebastian Kuzminsky
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
