> On 10 Oct 2019, at 3:02 am, Gene Heskett <ghesk...@shentel.net> wrote: > > On Wednesday 09 October 2019 06:31:09 Nicklas Karlsson wrote: > >> Have sometimes also experienced boot problems and today reinstalled a >> computer with Ubunte with boot problem stuck half way thru with >> Debian. Software in both distributions is very similar so it must be >> some small problem. Waiting for start process I have seen but not this >> time. >> >> Den tis 8 okt. 2019 kl 23:54 skrev Gene Heskett <ghesk...@shentel.net>: >>> I wrote a u-sd card with a pretty late April 2019 stretch. reset the >>> video to full KMS or whatever its called, rebooted and got nice >>> clean glxgears at about 45 fps full screen. Thats not half bad I >>> said to myself, but needs a realtime kernel. So I mounted my ssd's >>> and cd'd to media/pi/workpi120/buildbot/linux and rebuilt and >>> installed 4.19.76-rt over the top of a 4.14 something. >>> >>> Rebooted, but its now stuck about halfway thru the boot trace and >>> deader than a door nail to any method of input. I was going to take >>> a screen shot with my camera, but despite having had a hot usb cable >>> plugged in for about 6 weeks, its telling me to charge the battery. >>> So I plugged it in again and will give it half an hour. Hopefully >>> someone can diagnose whats hanging it. That was a hot reboot, not a >>> power cycle. And 4.19 is a newer kernel than the 4.14 it was >>> running. > > Now I am beginning to get pissed, no matter how I ask a > git clone --depth=1 --branch=4.14.y-rt /https://github.com/raspberrypi/linux > linux-rpi-4.14.y-rt > I get the non-rt branch. Its around 150 megabytes. >
Should it be —branch=rpi-4.14.y-rt > The 4.19.y-rt build won't boot, and I cannot get the > realtime 4.14.y-rt code base, so when I do a make bcm2709_defconfig, > I get a castrated .config that only has this: > ==================== > # Timers subsystem > # > CONFIG_TICK_ONESHOT=y > CONFIG_NO_HZ_COMMON=y > # CONFIG_HZ_PERIODIC is not set > CONFIG_NO_HZ_IDLE=y > # CONFIG_NO_HZ_FULL is not set > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > > # > # CPU/Task time and stats accounting > ================== > > Whats wrong with the above git clone command? > > Thanks. > > Cheers, Gene Heskett > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > Genes Web page <http://geneslinuxbox.net:6309/gene> > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
