I truly believe an SD image for RPi would be a real boost to LinuxCNC adoption, especially since there are now several Mesa cards that are compatible. There is a sizable user base in the Maker community using GRBL on RPi and Arduino who have likely outgrown that software. An article mentioning an SD image in Hackaday would likely bring some new blood into the LinuxCNC project.
On Sun, Aug 23, 2020, 3:09 PM andy pugh <bodge...@gmail.com> wrote: > On Sun, 23 Aug 2020 at 20:56, andy pugh <bodge...@gmail.com> wrote: > > > Please attempt to install it on any systems that you can to check that > it works. > > > > http://linuxcnc.org/docs/2.8/html/getting-started/updating-linuxcnc.html > > But note that the Raspberry Pi instructions simply don't work. The > plan is to distribute an SD card image. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
