tir. 15. sep. 2020 kl. 14:51 skrev andy pugh <[email protected]>: > > On Tue, 15 Sep 2020 at 13:56, John <[email protected]> wrote: > > > > I downloaded > > > > http://buildbot.linuxcnc.org/dists/buster/2.8-rtpreempt/binary-amd64/linuxcnc-uspace_2.8.0_amd64.deb > > Is there any chance of doing a documented installation to see what happens? > > (using www.linuxcnc.org/dists rather than buildbot.linuxcnc.org/dists) > > I want to know if the actual release is broken, I don't care about the > buildbot.
Fresh install on a VM, Debian Stretch with Mate, ssh and standard utilities, from the official Debian iso. After logging in the first time, these were the command i used $ sudo apt update $ sudo apt install dirmngr $ sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key 3cb9fd148f374fef $ echo deb http://linuxcnc.org/ stretch base 2.8-rtpreempt | sudo tee -a /etc/apt/sources.list.d/linuxcnc.list $ sudo apt update $ sudo apt install linuxcnc-uspace I confirmed which packages was installed: $ apt list linuxcnc-* --installed linuxcnc-doc-en/linuxcnc,now 1:2.8.0 all [installed] linuxcnc-uspace/linuxcnc,now 1:2.8.0 amd64 [installed] In the menu I have 10 entries in the "Other" category. No sub-category. Is this close to what you were after Andy? > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
