Send me what you have, I'll take a look. It should not include tool offsets of any kind. 5063 (skip position) does, 5043 does (absolute position off of current work offset) but 5023 should just be the raw machine position from the home positions (current g53 position).
Phil T. The Feral Engineer Check out my LinuxCNC tutorials, machine builds and other antics at www.youtube.com/c/theferalengineer Help support my channel efforts and coffee addiction: www.patreon.com/theferalengineer On Tue, Jul 27, 2021, 9:47 AM Rene Hopf via Emc-developers < emc-developers@lists.sourceforge.net> wrote: > I have added the parameters you asked for. I had the same problem when I > programmed my toolprobe macro. Will push to master shortly. According to > the fanuc docs it includes the tool offset. Does this make sense? > > > On 27. Jul 2021, at 15:41, Feral Engineer <theferalengin...@gmail.com> > wrote: > > > > I think it's brilliant > > > > Goto (standard loop to startpoint with error) > > Gotof (forward) > > Gotob (backward) > > Gotoc (continue looping without error) > > > > It's not so much the fact that they have four goto, it's the fact that > they > > have that many ways to do it... If that makes sense. Their manuals > > literally have 12 pages of how to program G2/G3 because there are so many > > ways to do it. That was kinda my point 😆 > > > > Phil T. > > The Feral Engineer > > > > Check out my LinuxCNC tutorials, machine builds and other antics at > > www.youtube.com/c/theferalengineer > > > > Help support my channel efforts and coffee addiction: > > www.patreon.com/theferalengineer > > > >> On Tue, Jul 27, 2021, 9:07 AM <ken.stra...@sympatico.ca> wrote: > >> > >> An interesting set of features! However, "...and four different methods > of > >> GOTO." doesn't sound like a feature to laud. > >> > >> -----Original Message----- > >> From: Feral Engineer <theferalengin...@gmail.com> > >> Sent: July 27, 2021 8:20 AM > >> To: EMC developers <emc-developers@lists.sourceforge.net> > >> Subject: Re: [Emc-developers] Question for the devs > >> > >> Simply put, I don't want workarounds, I want a solution as simple as > #5021 > >> to give me the ability to track where my machine is from my home > positions > >> without having to stand on one foot, rub my belly and hope I'm not using > >> coordinate rotation. I write logic in Fanuc, Mitsubishi and Siemens > >> controls constantly and see a lot of missing features in the o code > stuff > >> that I would be more than happy to address myself if I could ever get to > >> that level in CPP. > >> > >> Not sure how familiar you all are with the aforementioned controls, but > >> I'd be happy to provide manuals for the logic sections of all 3 so you > >> could see what each one is about. Fanuc and Mits are like 99% identical, > >> but Siemens is completely different and way more powerful. Some examples > >> would be that control has both WHILE and FOR loops, 3 dimensional data > >> arrays, unlimited nonvolatile variable assignment via GUD tables and > four > >> different methods of GOTO. > >> > >> > >> Phil T. > >> The Feral Engineer > >> > >> Check out my LinuxCNC tutorials, machine builds and other antics at > >> www.youtube.com/c/theferalengineer > >> > >> Help support my channel efforts and coffee addiction: > >> www.patreon.com/theferalengineer > >> > >>> On Tue, Jul 27, 2021, 6:17 AM andy pugh <bodge...@gmail.com> wrote: > >>> > >>>> On Mon, 26 Jul 2021 at 19:58, Chris Radek <ch...@timeguy.com> wrote: > >>> > >>>> (Note I'm not saying it would be bad to add this feature) > >>> > >>> The Fanuc numbers are in unclaimed space in the LinuxCNC parameter > >>> range, so I think I would go further and suggest that it would be good > >>> to add this feature. > >>> > >>> I recall this being one of my very first questions on the IRC when I > >>> first started with LinuxCNC. I can't remember why I wanted current abs > >>> position, but I did, and ended up using the G28.1 inelegant > >>> workaround. > >>> (It is inelegant because it has side-effects) > >>> > >>> -- > >>> atp > >>> "A motorcycle is a bicycle with a pandemonium attachment and is > >>> designed for the especial use of mechanical geniuses, daredevils and > >>> lunatics." > >>> — George Fitch, Atlanta Constitution Newspaper, 1912 > >>> > >>> > >>> _______________________________________________ > >>> Emc-developers mailing list > >>> Emc-developers@lists.sourceforge.net > >>> https://lists.sourceforge.net/lists/listinfo/emc-developers > >>> > >> > >> _______________________________________________ > >> Emc-developers mailing list > >> Emc-developers@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-developers > >> > >> > >> > >> _______________________________________________ > >> Emc-developers mailing list > >> Emc-developers@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/emc-developers > >> > > > > _______________________________________________ > > Emc-developers mailing list > > Emc-developers@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
