Rainer, Thank you for looking into it, very much appreciated!
Thanks, Greg On Mon, Oct 18, 2021 at 7:00 AM Rainer Stelzer <[email protected]> wrote: > Hi Greg, > > > Although, I do wonder if no X or Y are given, should L still be valid? > > totally agree. > > I retrofitted some machines with Sinumerik 810 controls. > Tapping and rigid tapping are done with the same G code on this controls > but ask for different parameters. > In combination with a very "economic" way of telling the user about the > detailed error, > you often find yourself in a stopped state and you have no clue whats > wrong. > > Linuxcnc should through an error if L is used in absolute mode with > G84, or without an X or Y Axis (like e.g. G53 does if it is not). > > I made some extensions to the homing procedures, and had some issues > with M19 and G33.1 , > so I'm working/reviewing the source anyhow right now. > I will have a look into to the G84 implementation and figure out how > hard it is to add this warning. > > Cheers > > Rainer > > > > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
