# Comment added
[ smoe](https://hosted.weblate.org/user/smoe/ "Steffen Möller"): [Hosted Weblate](https://hosted.weblate.org) / [LinuxCNC](https://hosted.weblate.org/projects/linuxcnc/) / [LinuxCNC Documentation](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/) / [English](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/) ## Source string G00 X Y Z rapid feed G01 X Y Z linear feed, e.g., G01 X10 Y20 Z30 F60 for 60 ipm G02 X Y Z I J clockwise circular feed (helical with Z) G03 X Y Z I J counterclockwise circular feed (helical with Z) G04 P<#> dwell # of seconds G10 L2 P<#> X Y Z set coordinates for system #1-9, 1 = G54, 9 = G59.3 G17 XY plane circular interpolation G18 ZX plane circular interpolation G19 YZ plane circular interpolation G20 English units (inches) G21 metric units (millimeters) G40 cancel cutter compensation G41 D<#> cutter compensation for tool <#>, tool on left G42 D<#> cutter compensation for tool <#>, tool on right G43 H<#> use tool length offset for tool #, 0 = no offset G49 cancel tool length offset G53 turn any coordinate offsets off for this block G54 use coordinate offsets for system #1, from G10 L2 P1 G55 "" for system #2, from G10 L2 P2 G56 "" for system #3, from G10 L2 P3 G57 "" for system #4, from G10 L2 P4 G58 "" for system #5, from G10 L2 P5 G59 "" for system #6, from G10 L2 P6 G59.1 "" for system #7, G10 L2 P7 G59.2 "" for system #8, G10 L2 P8 G59.3 "" for system #9, G10 L2 P9 G61 exact stop mode G64 cutting mode G76 threading canned cycle G80 cancel fixed (canned) cycle G81 drilling cycle, no dwell, rapid out G82 drilling cycle, dwell, rapid out G83 deep hole peck drilling cycle G84 tapping cycle G85 boring cycle, no dwell, feed out G86 boring cycle, spindle stop, rapid out G87 back boring cycle G88 boring cycle, spindle stop, manual out G89 boring cycle, with dwell, feed out G90 non-incremental programming (the usual) G91 incremental programming G93 inverse time feed mode G94 feed per minute mode (the usual) G98,G99 set canned cycle return level ## Source string description type: delimited block - ## Comment This should be a table. [Edit this string](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?checksum=8225378223d82967#comments) ## Source string location [help/tklinuxcnc.adoc:324](https://github.com/LinuxCNC/linuxcnc/blob/master/docs/help/tklinuxcnc.adoc?plain=1#L324) ## Translation Info All strings | [ 31,141 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-docs/en/) | -------------------------------------------------------------------|-----------|---- Translated strings | [ 31,141 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:>=translated) | [ 100% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:>=translated) Untranslated strings | [ 0 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:empty) | [ 0% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:empty) Unfinished strings | [ 0 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:<translated) | [ 0% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:<translated) Strings marked for edit | [ 0 ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:needs-editing) | [ 0% ](https://hosted.weblate.org/translate/linuxcnc/linuxcnc- docs/en/?q=state:needs-editing) [View](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/) [Weblate, the libre continuous localization system.](https://weblate.org/) Generated on June 5, 2022, 2:26 p.m..
_______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
