On 7/16/22 22:05, Jon Elson wrote:
Well, the saga continues! I thought I had this all working,
but then rebooted today, and could not get the MCS9900 card
to work properly. I could run my diag and see the boards
respond, but then when I ran some tests, the parport would
lock up, and lspci -vv would show "disabled" next to the
port addresses. The only way to clear it was a reboot.
Same thing happened with a Siig OXPCIe952 card.
It is pretty clear that either the driver or some other
kernel module is taking control of the parport when I want
to run at the "bare metal" level. This appears to be new
behavior with this kernel on the 2.8.2 distro.
So, I gave up on PCIe cards, and swapped the hard drive into
a Dell 980 with a parport on the motherboard. All seems to
work very well on that system.
Jon
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
