Sam,
I lowered the base thread to 25uS and the encoder error: rtapi_app:
caught signal 8 - dumping core , is gone!
-Bari
Brand new setup using stepconf. if I spin the spindle encoder
quickly by hand I get: rtapi_app: caught signal 8 - dumping core
Even if the machine is still in e-stop. Simple config using
stepconf LINUXCNC - 2.9.0~pre0 and 5.10 preempt_rt
All default settings other than manual edit of LPT base address and
changed setp encoder.0.position-scale 4000.000000 Default is like
100 vs 4000
Any ideas what causes this error?
https://forum.linuxcnc.org/media/kunena/attachments/1324/simple.ini
https://forum.linuxcnc.org/media/kunena/attachments/1324/simple.hal
The only mention of a similar error:
forum.linuxcnc.org/24-hal-components/358...hercat-lcec?start=10
https://forum.linuxcnc.org/49-basic-configuration/46796-rtapi-app-caught-signal-8-dumping-core
All the files are here. ^^
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
