Greetings all;
I just updated master on the go704, the preview dro overlay is clean
again, but the camera is blank, again.
Launched from an ssh -Y login, this is output behind the linuxcnc screen:
[QTvcp][DEBUG] DEBUGGING logging on (qtvcp:494)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] Machine is IMPERIAL based. unit
Conversion constant=25.4 (qt_istat.py:157)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] TRAJ COORDINATES: XYZA (qt_istat.py:163)
[QTvcp.QTVCP.QT_ISTAT][WARNING] Missing [DISPLAY] ANGULAR_INCREMENTS-
using defaults. (qt_istat.py:303)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] DEFAULT_LINEAR_VELOCITY = 15.0
(qt_istat.py:343)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] MIN_LINEAR_VELOCITY = 0.06 (qt_istat.py:344)
[QTvcp.QTVCP.QT_ISTAT][DEBUG] MAX_LINEAR_VELOCITY = 90.0 (qt_istat.py:345)
[QTvcp.QTVCP.QT_ISTAT][WARNING] Embedded tab configuration -invalid
number of TAB_NAMES vs TAB_LOCATION - guessing default. (qt_istat.py:432)
[QTvcp.QTVCP.LIB.SYS_NOTIFY][WARNING] Desktop Notify not available::
org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible
causes include: the remote application did not send a reply, the message
bus security policy blocked the reply, the reply timeout expired, or the
network connection was broken. (sys_notify.py:71)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] BASEPATH cam_align (qt_pstat.py:95)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align_handler.py
(qt_pstat.py:110)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align_handler.py
(qt_pstat.py:110)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in:
/usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:117)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT handler file path:
/usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:120)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align.ui
(qt_pstat.py:142)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align.ui
(qt_pstat.py:142)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in:
/usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:149)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT ui file from:
/usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:151)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align.qss
(qt_pstat.py:185)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align.qss
(qt_pstat.py:185)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in:
/usr/share/qtvcp/panels/cam_align/cam_align.qss (qt_pstat.py:192)
[QTvcp.QTVCP.QT_PSTAT][INFO] No qss file found. (qt_pstat.py:198)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align.qrc
(qt_pstat.py:213)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align.qrc
(qt_pstat.py:213)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in:
/usr/share/qtvcp/panels/cam_align/cam_align.qrc (qt_pstat.py:221)
[QTvcp.QTVCP.QT_PSTAT][INFO] No qrc file found. (qt_pstat.py:228)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/resources.py
(qt_pstat.py:238)
[QTvcp.QTVCP.QT_PSTAT][INFO] No resources.py file found, no QRC file to
compile one from. (qt_pstat.py:249)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/screens/cam_align/cam_align.qrc
(qt_pstat.py:260)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align/languages/cam_align_en.qm
(qt_pstat.py:260)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in:
/usr/share/qtvcp/screens/cam_align/languages/cam_align_en.qm
(qt_pstat.py:267)
[QTvcp.QTVCP.QT_PSTAT][INFO] Using no translations, default system
locale is: en (qt_pstat.py:272)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/screens/cam_align_ABOUT
(qt_pstat.py:283)
[QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for DEFAULT about file in:
/usr/share/qtvcp/panels/cam_align/cam_align_ABOUT (qt_pstat.py:289)
[QTvcp.QTVCP.QT_PSTAT][INFO] No about file found. (qt_pstat.py:295)
[QTvcp][INFO] Building A VCP Panel with: Python 3 (qtvcp:188)
[QTvcp][INFO] No handler file specified - using:
/usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qtvcp:191)
[QTvcp.QTVCP.QT_MAKEGUI][INFO] Qsettings file path:
/home/gene/.config/QtVcp/cam_align.conf (qt_makegui.py:97)
[QTvcp][DEBUG] Loading the handler file. (qtvcp:251)
[QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Adding import dir:
/usr/share/qtvcp/panels/cam_align (qt_makegui.py:290)
[QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Module 'cam_align_handler' imported OK
(qt_makegui.py:301)
[QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Module 'cam_align_handler' :
'get_handlers' function found. (qt_makegui.py:307)
[QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Registering handlers in module
cam_align_handler object <cam_align_handler.HandlerClass object at
0x7f8d9dbf0b70> (qt_makegui.py:317)
[QTvcp][DEBUG] Adding the key events filter. (qtvcp:261)
[QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None
(qt_makegui.py:192)
[QTvcp.QTVCP.QT_MAKEPINS][DEBUG] QTVCP: Parsing for HAL widgets.
(qt_makepins.py:113)
[QTvcp][DEBUG] Calling the handler file's initialized__ function
(qtvcp:284)
[QTvcp.CAM_ALIGN_HANDLER][DEBUG] cam_align user options:
['camnumber=1'] (cam_align_handler.py:46)
[QTvcp.QTVCP.QT_MAKEGUI][INFO] No Handler Override file at:
/home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/.cam_alignrc
(qt_makegui.py:358)
[QTvcp][DEBUG] Set HAL ready. (qtvcp:309)
[QTvcp][CRITICAL] Forwarding events to AXIS is not well tested yet.
(qtvcp:318)
[QTvcp][DEBUG] Show window. (qtvcp:366)
[QTvcp.QTVCP.QT_MAKEPINS][INFO] No preference file - cannot set
preference geometry. (qt_makepins.py:160)
Unable to stop the stream: Invalid argument
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR] Could not open video device
1 (camview_widget.py:418)
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 0 is working and reads
images (480.0 x 640.0) (camview_widget.py:494)
Unable to stop the stream: Invalid argument
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 1 is not working.
(camview_widget.py:488)
VIDEOIO ERROR: V4L: index 2 is not correct!
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 2 is not working.
(camview_widget.py:488)
VIDEOIO ERROR: V4L: index 3 is not correct!
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 3 is not working.
(camview_widget.py:488)
VIDEOIO ERROR: V4L: index 4 is not correct!
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 4 is not working.
(camview_widget.py:488)
VIDEOIO ERROR: V4L: index 5 is not correct!
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 5 is not working.
(camview_widget.py:488)
VIDEOIO ERROR: V4L: index 6 is not correct!
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 6 is not working.
(camview_widget.py:488)
[QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR] port number 1, is not a
working port- trying: 0 (camview_widget.py:421)
[QTvcp][INFO] Preference path: None (qtvcp:396)
Looks like I need to do something, but what?
It has worked while the dro display had the trash.
Thank you.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
