Only thing I see is you asked to use port 1 but port 0 is the working port. But it should have worked anyways. Any other clues? ________________________________ From: gene heskett <ghesk...@shentel.net> Sent: February 18, 2023 5:37 PM To: emc-developers@lists.sourceforge.net <emc-developers@lists.sourceforge.net> Subject: [Emc-developers] dro bug is gone, but so is cam-align again
Greetings all; I just updated master on the go704, the preview dro overlay is clean again, but the camera is blank, again. Launched from an ssh -Y login, this is output behind the linuxcnc screen: [QTvcp][DEBUG] DEBUGGING logging on (qtvcp:494) [QTvcp.QTVCP.QT_ISTAT][DEBUG] Machine is IMPERIAL based. unit Conversion constant=25.4 (qt_istat.py:157) [QTvcp.QTVCP.QT_ISTAT][DEBUG] TRAJ COORDINATES: XYZA (qt_istat.py:163) [QTvcp.QTVCP.QT_ISTAT][WARNING] Missing [DISPLAY] ANGULAR_INCREMENTS- using defaults. (qt_istat.py:303) [QTvcp.QTVCP.QT_ISTAT][DEBUG] DEFAULT_LINEAR_VELOCITY = 15.0 (qt_istat.py:343) [QTvcp.QTVCP.QT_ISTAT][DEBUG] MIN_LINEAR_VELOCITY = 0.06 (qt_istat.py:344) [QTvcp.QTVCP.QT_ISTAT][DEBUG] MAX_LINEAR_VELOCITY = 90.0 (qt_istat.py:345) [QTvcp.QTVCP.QT_ISTAT][WARNING] Embedded tab configuration -invalid number of TAB_NAMES vs TAB_LOCATION - guessing default. (qt_istat.py:432) [QTvcp.QTVCP.LIB.SYS_NOTIFY][WARNING] Desktop Notify not available:: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (sys_notify.py:71) [QTvcp.QTVCP.QT_PSTAT][DEBUG] BASEPATH cam_align (qt_pstat.py:95) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:110) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align_handler.py (qt_pstat.py:110) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:117) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT handler file path: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:120) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:142) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align.ui (qt_pstat.py:142) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:149) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT ui file from: /usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:151) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align.qss (qt_pstat.py:185) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align.qss (qt_pstat.py:185) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /usr/share/qtvcp/panels/cam_align/cam_align.qss (qt_pstat.py:192) [QTvcp.QTVCP.QT_PSTAT][INFO] No qss file found. (qt_pstat.py:198) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/cam_align/cam_align.qrc (qt_pstat.py:213) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align.qrc (qt_pstat.py:213) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /usr/share/qtvcp/panels/cam_align/cam_align.qrc (qt_pstat.py:221) [QTvcp.QTVCP.QT_PSTAT][INFO] No qrc file found. (qt_pstat.py:228) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/panels/resources.py (qt_pstat.py:238) [QTvcp.QTVCP.QT_PSTAT][INFO] No resources.py file found, no QRC file to compile one from. (qt_pstat.py:249) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/screens/cam_align/cam_align.qrc (qt_pstat.py:260) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/cam_align/languages/cam_align_en.qm (qt_pstat.py:260) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /usr/share/qtvcp/screens/cam_align/languages/cam_align_en.qm (qt_pstat.py:267) [QTvcp.QTVCP.QT_PSTAT][INFO] Using no translations, default system locale is: en (qt_pstat.py:272) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/qtvcp/screens/cam_align_ABOUT (qt_pstat.py:283) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for DEFAULT about file in: /usr/share/qtvcp/panels/cam_align/cam_align_ABOUT (qt_pstat.py:289) [QTvcp.QTVCP.QT_PSTAT][INFO] No about file found. (qt_pstat.py:295) [QTvcp][INFO] Building A VCP Panel with: Python 3 (qtvcp:188) [QTvcp][INFO] No handler file specified - using: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qtvcp:191) [QTvcp.QTVCP.QT_MAKEGUI][INFO] Qsettings file path: /home/gene/.config/QtVcp/cam_align.conf (qt_makegui.py:97) [QTvcp][DEBUG] Loading the handler file. (qtvcp:251) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Adding import dir: /usr/share/qtvcp/panels/cam_align (qt_makegui.py:290) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Module 'cam_align_handler' imported OK (qt_makegui.py:301) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Module 'cam_align_handler' : 'get_handlers' function found. (qt_makegui.py:307) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Registering handlers in module cam_align_handler object <cam_align_handler.HandlerClass object at 0x7f8d9dbf0b70> (qt_makegui.py:317) [QTvcp][DEBUG] Adding the key events filter. (qtvcp:261) [QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None (qt_makegui.py:192) [QTvcp.QTVCP.QT_MAKEPINS][DEBUG] QTVCP: Parsing for HAL widgets. (qt_makepins.py:113) [QTvcp][DEBUG] Calling the handler file's initialized__ function (qtvcp:284) [QTvcp.CAM_ALIGN_HANDLER][DEBUG] cam_align user options: ['camnumber=1'] (cam_align_handler.py:46) [QTvcp.QTVCP.QT_MAKEGUI][INFO] No Handler Override file at: /home/gene/linuxcnc/configs/GO704-5i25-7i76-camera/.cam_alignrc (qt_makegui.py:358) [QTvcp][DEBUG] Set HAL ready. (qtvcp:309) [QTvcp][CRITICAL] Forwarding events to AXIS is not well tested yet. (qtvcp:318) [QTvcp][DEBUG] Show window. (qtvcp:366) [QTvcp.QTVCP.QT_MAKEPINS][INFO] No preference file - cannot set preference geometry. (qt_makepins.py:160) Unable to stop the stream: Invalid argument [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR] Could not open video device 1 (camview_widget.py:418) [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 0 is working and reads images (480.0 x 640.0) (camview_widget.py:494) Unable to stop the stream: Invalid argument [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 1 is not working. (camview_widget.py:488) VIDEOIO ERROR: V4L: index 2 is not correct! [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 2 is not working. (camview_widget.py:488) VIDEOIO ERROR: V4L: index 3 is not correct! [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 3 is not working. (camview_widget.py:488) VIDEOIO ERROR: V4L: index 4 is not correct! [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 4 is not working. (camview_widget.py:488) VIDEOIO ERROR: V4L: index 5 is not correct! [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 5 is not working. (camview_widget.py:488) VIDEOIO ERROR: V4L: index 6 is not correct! [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][DEBUG] Port 6 is not working. (camview_widget.py:488) [QTvcp.QTVCP.WIDGETS.CAMVIEW_WIDGET][ERROR] port number 1, is not a working port- trying: 0 (camview_widget.py:421) [QTvcp][INFO] Preference path: None (qtvcp:396) Looks like I need to do something, but what? It has worked while the dro display had the trash. Thank you. Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
