Uses enters three commands before first one finishes. First command can't
finish for some reason. The other commands are already entered (stacked)
They should not run.
In other words, If there is an error in MDI, the stack of commands should be
flushed and an error posted.
This seems reasonable.
As for resetting everything, ya I agree probably shouldn't.
I guess it might depend on the actual error.
Sent from my Galaxy
-------- Original message --------
From: Bertho Stultiens <l...@vagrearg.org>
Date: 2025-06-06 9:15 a.m. (GMT-08:00)
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] Proposal: Change default behavior on abort to 'M2'
On 6/6/25 3:55 PM, Chris Morley wrote:
> I was teferring to "stacked' MDI commands. Ie entering three
> commands before the first one finishes. How would you expect that to
> be handled?
1) enter command #1 --> machine starts to run lengthy operation
2) enter command #2 --> error displayed in MDI: Bad command
(machine is still operating on command #1)
3) enter command #3 --> User ignored error and blindly continued
(machine still operating on command #1)
(machine will eventually get to #3 and never execute #2)
That is the scenario.
If the user ignores the error message after entering command #2, then
that I would call, and sorry for being blunt, PEBKAC/PEBCAK/PICNIC.
--
Greetings Bertho
(disclaimers are disclaimed)
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
