I would recommend that you use the IEC-68-2 Environmental Test Standards. This series of standards covers everything from temperature and humidity, to shock and vibration. Typically, the issues of operating and storage are addressed in these standards as heat-producing and non-heat-producing.
IEC-68-2-1, IEC-68-2-2, and IEC-68-3 cover most of the temperature and humidity requirements. IEC-68-2-6 and IEC-68-2-27 cover sinusoidal vibration and shock. I hope this helps. At 02:34 PM 10/8/96 MS, you wrote: >--------- Start Of Original Message ------------------- >Hello > >I am looking for a recommendation or standard for operating and storage >environment. >The type of equipment would be both commercial and consumer. If there are two >different >standards I would like to know that also. > >What would a PC manufacturer use? What would a cable converter box manufacturer >use? > >I am aware of the Bellcore NEBS, but was looking for something in a Lite spec. > >Temperature range, humidity range, vibration and altitude would be among the >specifications. > >Thank you for your help! > > >><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> >Joe Dwyer >Sr. Engineer International Approvals >Inter-Tel. Tel: +1 602 961 9000 x1235 >7300 West Boston Street Fax: +1 602 961 6940 >Chandler, AZ 85226 U.S.A. >Internet: [email protected] www.inter-tel.com >Inter-Tel designs and sells PBX and Hybrid Telephone equipment worldwide. >><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> > > o>---------- End Of Original Message -------------------- Thank You, Robert L. Terry Compliance Engineer Nematron Corporation Phone: 313-994-0591 x235 5840 Interface Drive FAX: 313-994-8408 Ann Arbor, Michigan 48103 E-Mail: [email protected] U.S.A
