Hello TO,
>From your inquiry, it seems as if you have covered almost everything to sell
>your product in the USA - except the network protection requirements. All
>devices connecting to the Public Switch Telephone Network (PSTN) will need to
>meet this requirement. The requirement can be met by complying with FCC Part
>68 in which REGISTRATION of your product with the FCC will be necessary.
The requirements that you meet under FCC Part 15 and UL1950 should be enough
for US EMC and Safety.
If you should need additional information, please feel free to contact me at
011-49-6039-9182-0 (Germany) or 001-301-855-1375 (USA).
Best Regards,
Bandele Adepoju
Rockford Engineering Services, Inc
Tel: 001-301-855-1375 (USA)
011-49-6039-9182-0 (Europe - Germany)
Fax 001-410-586-1460 (USA)
011-49-6039-9182-29 (Europe - Germany)
Email: [email protected]
Web: www.resemc.com
----------
From: TO [SMTP:[email protected]]
Sent: Wednesday, August 19, 1998 5:49 AM
To: '[email protected]'
Subject: Help with USA EMC-Safety certification
We have Telecommunication terminal equipment (switch), which has been tested
for European market for EMC and safety in an Australian Test House.
It meets EMC emission limits CISPR22 class A, IEC-1000 series Immunity limits
and IEC950 safety requirements. This is sufficient for CE marking.
Equipment complies with FCC part 15 emission requirements and UL1950.
Could someone put me on the right track regarding EMC and safety certification
in the USA. Can we legally issue certificate of compliance and export this
equipment to USA or is it mandatory to test it again in the USA test House?
Do we have to register this equipment with Authorities such as FCC?
How do we go formally about it
Regards
Tony Olejnicki
[email protected]
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], or [email protected] (the list
administrators).
---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes). For help, send mail to [email protected],
[email protected], or [email protected] (the list
administrators).
