http://www.microlinear.com
http://www.microlinear.com/toc.shtml : Table of content > -----Original Message----- > From: Sparacino,George [SMTP:[email protected]] > Sent: Thursday, November 19, 1998 1:11 PM > To: Daniel Sicard; EMC-PSTC (E-mail) > Subject: RE: Active Power Factor Correction > > Dan, do you have the web address for microlinear ? > > Thanks, > George > > > -----Original Message----- > > From: Daniel Sicard [SMTP:[email protected]] > > Sent: Wednesday, November 18, 1998 9:12 PM > > To: EMC-PSTC (E-mail) > > Subject: RE: Active Power Factor Correction > > > > This actually not an add on device but a caracteristic design in the > > front > > end of a power supply. > > If you can get a copy of some hold (2-4 years) Unitrode seminar > > handbook or > > Unitrode application > > notes for their ICs you will get some basic information about these. > > Also > > Microlinear web site is > > providing some info on the subject. > > > > > -----Original Message----- > > > From: POWELL, DOUG [SMTP:[email protected]] > > > Sent: Wednesday, November 18, 1998 1:55 PM > > > To: EMC-PSTC (E-mail) > > > Subject: Active Power Factor Correction > > > > > > Hello Colleagues, > > > > > > I have recently learned of a technology whereby harmonic > > disturbances may > > > be > > > reduced via APFC (Active Power Factor Correction). This is > > apparently a > > > device that injects cancellation harmonics back onto the line under > > closed > > > loop control. > > > > > > Is anyone able to point me to any resources where I can learn more? > > > > > > > > > > > > =================================== > > > Doug Powell, Compliance Engineer > > > Advanced Energy Industries, Inc. > > > 1625 Sharp Point Drive m/s 2018 > > > Fort Collins, Colorado 80525 USA > > > > > > Phone: 970-407-6410 > > > eFax: 970-407-5410 > > > email: [email protected] > > > (new address) > > > =================================== > > > > > > --------- > > > This message is coming from the emc-pstc discussion list. > > > To cancel your subscription, send mail to [email protected] > > > with the single line: "unsubscribe emc-pstc" (without the > > > quotes). For help, send mail to [email protected], > > > [email protected], [email protected], or > > > [email protected] (the list administrators). > > > > --------- > > This message is coming from the emc-pstc discussion list. > > To cancel your subscription, send mail to [email protected] > > with the single line: "unsubscribe emc-pstc" (without the > > quotes). For help, send mail to [email protected], > > [email protected], [email protected], or > > [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
