You are right, this Standard has not been published by the OJ yet. Gert Gremmen
== Ce-test, Qualified testing == Consultants in EMC, Electrical safety and Telecommunication Compliance tests for European standards and ce-marking Member of NEC/IEC voting committee for EMC. Our Web presence: http://www.cetest.nl List of current harmonized standards http://www.cetest.nl/emc-harm.htm 15 great tips for the EMC-designer http://www.cetest.nl/features01.htm -----Oorspronkelijk bericht----- Van: Andy Griffin <[email protected]> Aan: [email protected] <[email protected]>; [email protected] <[email protected]> Datum: donderdag 2 april 1998 3:39 Onderwerp: RE: EN 61236-1 or EN 61326-1 ? ? ? >EN61236 has been listed in the OJ under the LVD, can not find any reference >to EN61326-1 ? > >CENELEC >EN 61236 >Saddles, pole clamps (stick clamps) and >accessories for live working > >IEC 1236:1993, mod. >1995 >listing reference C 125 of 1997-04-22 > >At 10:17 AM 4/1/98 -0600, [email protected] wrote: >>If we're talking about EN 61326-1:1997 (not EN 61236) then I have not seen >>any confirmation that it has been published in the OJ, but I'd be happy to >>hear that it is. (Well - as happy as I could be given I already have too >>much testing to do.) >> >>BS EN 61326-1:1997 was published by BSI on 15 November 1997, and says it >>was approved by CENELEC on 11 March 1997. I suppose that, if the >>Commission was in the right mood, they could have published it in the OJ >>about a month later. My understanding is that it takes six to nine months >>to go from EN to OJ. >> >>If a standard called EN 61236 does exist, what is it? What is it for? >> >>Regards, >>Eric Lifsey >>National Instruments >> >> >> >> >> >>"WOODS, RICHARD" <[email protected]> on 03/31/98 01:41:02 PM >> >>Please respond to "WOODS, RICHARD" <[email protected]> >> >>To: "'emc-pstc'" <[email protected]>, "'CTL'" <[email protected]> >>cc: (bcc: Eric Lifsey/AUS/NIC) >>Subject: RE: EN 61236-1 >> >> >> >>Content-type: text/plain; charset=iso-8859-1 >>Content-transfer-encoding: quoted-printable >> >> >> >>EN 61236 (no dash number) was published in the OJ on 1997-04-22. There >>is no mention of the -1 standard. You can find the standards that have >>been published as of the end of 1997 at www2.echo.lu. >>> ---------- >>> From: CTL[SMTP:[email protected]] >>> Sent: Monday, March 30, 1998 4:05 PM >>> To: 'emc-pstc' >>> Subject: EN 61236-1 >>> >>> Does anyone know the status of EN 61236-1.=A0 I don't think it is >>> published in the O.J. at this time and if not then a manufacturer >>> cannot self-declare to it. >>> >>> Pryor McGinnis >>> [email protected] <mailto:[email protected]> >>> >>> >> >> >> >> >>= >> > >Regs Andy Griffin >
