One further note: I believe a U.S. lab that is accredited by either AALA or NVLAP is considered a "certified" lab under mutual recognition agreement. However, I'm not sure of the current status of the MRA.
Jim Hulbert Pitney Bowes ---------------------- Forwarded by Jim Hulbert/MSD/US/PBI on 03/01/99 02:33 PM --------------------------- From: "WOODS RICHARD" <[email protected]> AT SMTPGWY on 03/01/99 08:58 AM To: [email protected] AT SMTPGWY@pbiccmail, "'Sparacino George'" <[email protected]> AT SMTPGWY@pbiccmail cc: (bcc: Jim Hulbert/MSD/US/PBI) Subject: RE: C Tick.. George you can find a complete description of the requirements at http://www.sma.gov.au/ <http://www.sma.gov.au/> . Only emissions are required. The person residing in Australia and responsible for placing the product on the market is responsible for making the application. Reports are not required to be submitted, but must be available for inspection. Existing reports are acceptable, however, the authorities have the right to accept reports only from certified labs. ---------- From: Sparacino,George [SMTP:[email protected]] Sent: Friday, February 26, 1999 4:26 PM To: [email protected] Subject: C Tick.. Good day, I was asked to investigate what is required to obtain the "C tick" for our products. Our products have been evaluated to the applicable stds as prescribed by the EMC directive for ITE equipment (emissions & immunity). My Questions: I understand that the c tick marking is a required marking of EMC approval for electronic devices. Does this cover both emissions & immunity ? or just emissions ? Can I request applications myself (I'm in the USA) or do I need an Australian rep to do this ? Could I present my existing reports / certificates (created to satisfy EMC directive), or am I required to generate new ones in a specified (ACA) report format. Thanks for any help you can give me. George --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
RFC822.TXT
Description: Text - character set unknown
