The comments from Jim Hulbert are correct. Any lab accredited by either A2LA or NVLAP is considered "certified" by NATA and as such considered an accredited lab by the ACA.
Best regards, Kevin Richardson Stanimore Pty Limited "Specialists in Technology Requirements and Compliance" Ph: 02-43-29-4070 Fax: 02-43-28-5639 Int'l: +61-2-43-2x-xxxx Email: [email protected] (Internet) or [email protected] (Internet) or 100356,374 (Compuserve) > Topic: Internet Message Header > > Sender: [email protected] > Received: from ruebert.ieee.org (ruebert.ieee.org [199.172.136.3]) > by dub-img-10.compuserve.com (8.8.6/8.8.6/2.18) with ESMTP id IAA09651; > Tue, 2 Mar 1999 08:24:17 -0500 (EST) > Received: by ruebert.ieee.org (8.8.8/8.8.8) > id IAA04741; Tue, 2 Mar 1999 08:16:46 -0500 (EST) > From: [email protected] > X-Lotus-FromDomain: 3M-CORPORATE > To: "Jim Hulbert" <[email protected]> > cc: [email protected] > Message-ID: <[email protected]> > Date: Tue, 2 Mar 1999 07:16:50 -0600 > Subject: RE: C Tick.. > Mime-Version: 1.0 > Content-type: multipart/mixed; Boundary="0__=vpacxkhCIvs2J5hNpqCMHxCgrlfhqHa9UfaNJVR71lYaAW3NqLdLe1Jt" > Content-Disposition: inline > Sender: [email protected] > Precedence: bulk > Reply-To: [email protected] > X-Resent-To: Multiple Recipients <[email protected]> > X-Listname: emc-pstc > X-Info: Help requests to [email protected] > X-Info: [Un]Subscribe requests to [email protected] > X-Moderator-Address: [email protected] > > > > The MRA with Australia is currently in force..............and A2LA (AALA) > and NVLAP are both signatories. > > =========================================================================== > ========= > > > > > "Jim Hulbert" <[email protected]> on 03/01/99 01:35:29 PM > > Please respond to "Jim Hulbert" <[email protected]> > > > To: [email protected] > cc: (bcc: Robert E. Heller/US-Corporate/3M/US) > Subject: RE: C Tick.. > > > > > > > One further note: I believe a U.S. lab that is accredited by either AALA > or > NVLAP is considered a "certified" lab under mutual recognition agreement. > However, I'm not sure of the current status of the MRA. > > Jim Hulbert > Pitney Bowes > > > ---------------------- Forwarded by Jim Hulbert/MSD/US/PBI on 03/01/99 > 02:33 PM > --------------------------- > > From: "WOODS RICHARD" <[email protected]> AT SMTPGWY on 03/01/99 08:58 > AM > > To: [email protected] AT SMTPGWY@pbiccmail, "'Sparacino George'" > <[email protected]> AT SMTPGWY@pbiccmail > cc: (bcc: Jim Hulbert/MSD/US/PBI) > > Subject: RE: C Tick.. > > > > > George you can find a complete description of the requirements at > http://www.sma.gov.au/ <http://www.sma.gov.au/> . > Only emissions are required. The person residing in Australia and > responsible > for placing the product on the market is responsible for making the > application. > Reports are not required to be submitted, but must be available for > inspection. > Existing reports are acceptable, however, the authorities have the right to > accept reports only from certified labs. > > ---------- > From: Sparacino,George [SMTP:[email protected]] > Sent: Friday, February 26, 1999 4:26 PM > To: [email protected] > Subject: C Tick.. > > Good day, > > I was asked to investigate what is required to obtain the "C tick" > for > our products. > > Our products have been evaluated to the applicable stds as > prescribed by > the EMC directive for ITE equipment (emissions & immunity). > > > My Questions: > > I understand that the c tick marking is a required marking of EMC approval > for > electronic devices. Does this cover both emissions & immunity ? or just > emissions ? > > Can I request applications myself (I'm in the USA) or do I need an > Australian > rep to do this ? > > Could I present my existing reports / certificates (created to > satisfy > EMC directive), or am I required to generate new ones in a specified (ACA) > report format. > > Thanks for any help you can give me. > George > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], > [email protected], or [email protected] (the list administrators). > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], > [email protected], or [email protected] (the list administrators). > > > > > > =================== End Part 1 / Begin Part 2 ===================== > Topic: Text - character set unknown > Name: RFC822.TXT > > % Part 2 is binary > > ========================== End Part 2 ============================= > Best regards, Kevin Richardson Stanimore Pty Limited "Specialists in Technology Requirements and Compliance" Ph: 02-43-29-4070 Fax: 02-43-28-5639 Int'l: +61-2-43-2x-xxxx Email: [email protected] (Internet) or [email protected] (Internet) or 100356,374 (Compuserve) --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
