Group and Mr. Tarnowski,

I don't know the answer for this question, but it lead me to other doubt
I have...

When read in my Receiver/Spectrum Analyzer: 50 Ohms, what is the
frequency range on which this impedance is valid? This question also
applies to impedance of loudspeakers (generally 8 or 4 ohms)??

And the impedance of my network? How do I determine?

Thanks in advance for those who answer...

Good Weekend!!

Muriel

[email protected] wrote:
> 
> 
>      Fellow Networkers;
> 
>      Does there exist information about the impedance (at 60 Hz) of typical
>      power line networks here in the US?
> 
>      In Europe, I know they use a specified reference impedance (at 50 Hz)
>      for flicker testing, which is (0.24 + j0.15) Ohm for line and (0.16 +
>      j0.10) Ohms.  This represents, I understand, the European public
>      network impedance as seen at the point of "common coupling" (i.e.,
>      connection to the homes service entrance).
> 
>      David Tarnowski
>      Whirlpool Corporation
>      Global Laundry Controls
>      St. Joseph, MI
> 
> 
> ---------
> This message is coming from the emc-pstc discussion list.
> To cancel your subscription, send mail to [email protected]
> with the single line: "unsubscribe emc-pstc" (without the
> quotes).  For help, send mail to [email protected],
> [email protected], [email protected], or
> [email protected] (the list administrators).

-- 
======================================================================
Muriel Bittencourt de Liz
GRUCAD - Group for Conception & Analysis of Electromagnetic Devices
Santa Catarina Federal University - UFSC 
PO Box: 476   ZIP: 88040-900 - Florianópolis - SC - BRAZIL
Phone: +55.48.331.9649 - Fax: +55.48.234.3790
e-mail: [email protected]
ICQ#: 9089332
Alternativa Adreso: [email protected]

---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).

Reply via email to