Part 18 is to be used by ISM equipment that intentionally generates RF
energy for a designed purpose such as an arc-welder, MRI medical device, or
an induction heater. Equipment that intentionally generates RF energy to be
used within the device such as for the purpose of moving data along a bus
are covered by Part 15 (unintentional radiators).

===========================================================================
===




[email protected] on 01/12/99 04:25:27 PM

Please respond to [email protected]


To:   [email protected]
      [email protected]
cc:    (bcc: Robert E. Heller/US-Corporate/3M/US)
Subject:  Re: FCC exemptions




 Hi Moshe,

 You are almost correct. 15.103(c) actually states "A digital device used
 exclusively as industrial, commercial, or medical TEST (my emphasis)
 equipment." I would take this as meaning that all test equipment used in
these
 specific environments are exempt from FCC Part 15 compliance.

 As I understand it, Industrial, Scientific and Medical (ISM) devices are
 covered by FCC Part 18, not Part 15. Although, I'm not sure if ISM test
 equipment falls in here, as well. Anyway, it would seem that your
"industrial
 product" should comply with Part 18, not Part 15. Anyone out there with
more
 experience in this area than I want to comment further?

 Just an extra 2 cents I wanted to throw into the bucket.

 Best regards,
 Ron Pickard
 [email protected]


______________________________ Reply Separator
_________________________________
Subject: FCC exemptions
Author:  <[email protected]> at INTERNET
List-Post: [email protected]
Date:    1/12/99 8:48 PM


Hello everyone,

47CFR part 15 (15.103 item C) states that "A digital device used
exclusively as
dustrial,
commercial, or medical equipment" is "exempt from the specific technical
standar
".

1. Can someone give a rational explanation to this exemption?

2. I have an industrial product which automatically inspects PCB panels for
defe
s. Is this
product exempt from class A limitations?
In what way is such a product different in emissions from a "non-test"
product s
h as a
scanner.

3. If I take advantage of this exemption, where can I expect trouble (if
any)?

thanks in advance,
Moshe
--------------------------------------------
Name: moshe valdman
E-mail: [email protected]
Phone: 972-52-941200
Telefax: 972-3-5496369
List-Post: [email protected]
Date: 12/1/99
Time: 20:48:48
You are most welcome to visit my homepage at:

http://www.geocities.com/CapeCanaveral/5233/
--------------------------------------------


---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).




---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).








---------
This message is coming from the emc-pstc discussion list.
To cancel your subscription, send mail to [email protected]
with the single line: "unsubscribe emc-pstc" (without the
quotes).  For help, send mail to [email protected],
[email protected], [email protected], or
[email protected] (the list administrators).

Reply via email to