Greetings: A good source is A Handbook on Electromagnetic Shielding Materials and Performance, by Donald R.J. White, Gainesville, VA. Bogdan.
Matejic, Mirko wrote: > You must register on > > http://astimage.daps.dla.mil/online/ > > to get the access to MIL-STDs > > Mirko > > > -----Original Message----- > > From: Matejic, Mirko > > Sent: Tuesday, December 14, 1999 10:22 > > To: 'Jose Miguel Rio'; [email protected] > > Subject: RE: copper properties & MIL-STD 461 & 462 > > > > > > MIL-STD-461E REQUIREMENTS FOR THE CONTROL OF > > ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS > > OF SUBSYSTEMS AND EQUIPMENT issued on August 20, > > 1999, 253 pages is available in Acrobat Reader format, 970 KB on: > > > > http://assist.daps.mil/eAccess/index.cfm?ident_number=35789 > > > > Mirko > > > > > -----Original Message----- > > > From: Price, Ed [SMTP:[email protected]] > > > Sent: Tuesday, December 14, 1999 9:43 > > > To: 'Jose Miguel Rio'; [email protected] > > > Subject: RE: copper properties & MIL-STD 461 & 462 > > > > > > > > > Jose: > > > > > > The best source of information about MIL-STD-461 is the standard itself. > > > All > > > of the requirements are defined very thoroughly (well, maybe not so > > > thorough > > > for Methods CS103, CS104 & CS105) within the document, and an Appendix A > > > is > > > provided which gives you a discussion of the purposes, problems and > > > rationale behind each of the Test Methods. > > > > > > Remember that the "D" revision has now been superseded by the "E" > > version. > > > What used to be MIL-STD-461D and the separate MIL-STD-462D have now been > > > combined into a single document, which is MIL-STD-461E. New equipment > > > should > > > be qualified to the "E" version, but existing equipment may still be > > > tested > > > under the version in effect at the time of the original qualification. > > So, > > > don't throw away your "B", "C" or "D" versions. > > > > > > Ed > > > > > > > > > > --------- > > This message is coming from the emc-pstc discussion list. > > To cancel your subscription, send mail to [email protected] > > with the single line: "unsubscribe emc-pstc" (without the > > quotes). For help, send mail to [email protected], > > [email protected], [email protected], or > > [email protected] (the list administrators). > > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to [email protected] > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to [email protected], > [email protected], [email protected], or > [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
