MIL-STD-461E REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT issued on August 20, 1999, 253 pages is available in Acrobad Reader format, 970 KB on:
http://assist.daps.mil/eAccess/index.cfm?ident_number=35789 Mirko > -----Original Message----- > From: Price, Ed [SMTP:[email protected]] > Sent: Tuesday, December 14, 1999 9:43 > To: 'Jose Miguel Rio'; [email protected] > Subject: RE: copper properties & MIL-STD 461 & 462 > > > Jose: > > The best source of information about MIL-STD-461 is the standard itself. > All > of the requirements are defined very thoroughly (well, maybe not so > thorough > for Methods CS103, CS104 & CS105) within the document, and an Appendix A > is > provided which gives you a discussion of the purposes, problems and > rationale behind each of the Test Methods. > > Remember that the "D" revision has now been superseded by the "E" version. > What used to be MIL-STD-461D and the separate MIL-STD-462D have now been > combined into a single document, which is MIL-STD-461E. New equipment > should > be qualified to the "E" version, but existing equipment may still be > tested > under the version in effect at the time of the original qualification. So, > don't throw away your "B", "C" or "D" versions. > > Ed > > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
