I tried the two links below. The first was not found and the second produced an item about household appliances. The link below provides a summary of Resolution 92/98 and on the implementations schedules. It also provides a list of additional publications, one of which is the Disposition 1009/98 referenced below.
http://www.tradeport.org/ts/countries/argentina/mrr/mark0039.html The above web site is a Los Angeles area site put up by a consortium of organizations interested in trade and with funding from various federal, state and local government agencies. Scott [email protected] ECRM Incorporated Tewksbury, MA USA -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, September 22, 1999 10:37 AM To: [email protected] Subject: RE: Argentina Disposition 1009/98 requires that all electrical products under 50V comply with the requirements of Resolution 92/98 effective 18 August 1999. A Declaration of Conformity will be required for the first year after which the second phase (test certificate) of Resolution 92/98 will be effective. For all other electronic equipment, Disposition 499/99 extends the deadline for the second phase to 18 September 1999. A summary of the requirements in English is available at http://www.tradeport.org/ts/countries/argentina/mrr/mark0157.html <http://www.tradeport.org/ts/countries/argentina/mrr/mark0157.html> , and http://www.tradeport.org/ts/countries/argentina/mrr/mark0001.html <http://www.tradeport.org/ts/countries/argentina/mrr/mark0001.html> These documents contain Argentine contact information. ---------- From: [email protected] [SMTP:[email protected]] Sent: Wednesday, September 22, 1999 9:00 AM To: [email protected] Cc: [email protected] Subject: Re: Argentina Argentina's resolution 92/98 is now in its second phase of application, and since 18 September all products powered from more than 50V now need either formal safety certification (eg by IRAM) or an approved Argentine conformity mark before they can be imported into Argentina. Certification can be to any appropriate IEC safety standard, including 60959, 61010-1, 60335, etc. You should check which standard applies to your product. There has been talk of a disposition concerning industrial equipment, but only where the power is supplied by other than the standard domestic mains system. You should contact IRAM concerning this: try Osvaldo Petroni there on e-mail: [email protected] Roger Viles WWG [email protected] (Paul Finn) on 20/09/99 16:12:08 Please respond to [email protected] (Paul Finn) To: [email protected] cc: (bcc: Roger Viles/PLY/Global) Subject: Argentina Can anyone shed some light on the recent Argentina requirement which mandates all electrical apparatus be evaluated to IEC 60950? Would industrial apparatus also require evaluation to this verses IEC 61010? I believe this may be documented in Resolution 92, has this finally go into affect? Any comments would be greatly appreciated. Paul Finn Panametrics, Inc. tel: 781-899-2719 fax: 781-899-8968 --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
