Are their any special test equipment requirements in 55103-1 that go beyond what we are accustomed to using on the Open Area Test Site for radiated measurements?
------------------------------------------------- No. The 'standard' EN55022 setup is referenced and dependant on the equipments 'environment' (rated E1 through to E5), you'll use either the Class B limits at 10 metres or 30 metres. One point to note though is that if the largest dimension is less than 1 metre then you can apply clause 5.5 of EN55013, which from memory is the absorbing clamp method used on the cables (somebody please correct me if i'm wrong!) ------------------------------------------------- And what is chamber setup criteria given the following assumptions: (A) Our fully-lined ferrite chamber measures 3mX3mX7m in length. and (B) We use the standard biconcial/log with spectrum analyzer setup common to Open Area Testing. Sorry if I have over-generalized my statement in need of specific criteria, but at this point any information is better than none. -------------------------------------------------- Having had little or no experience of using a ferrite tiled room I can't comment. --------------------------------------------------- If you need any more information let me know as I regularly use these 2 standards. Regards Paul Excite -- Control Yourself. This E-mail brought to you by Excite's free E-mail service. Get your own E-mail address at http://www.excite.co.uk --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
