Greetings and salutations, It is my understanding that the Professional Audio, Video......EN standard 55103-1 is mandatory as of September 1999. Unfortunate for our lab and for two reasons, (1) We have not yet received our e-mail ordered copies of the emissions and immunity standards and (2) We are OATS players with limited knowledge in performing emissions testing using a ferrite lined chamber.
Are their any special test equipment requirements in 55103-1 that go beyond what we are accustomed to using on the Open Area Test Site for radiated measurements? And what is chamber setup criteria given the following assumptions: (A) Our fully-lined ferrite chamber measures 3mX3mX7m in length. and (B) We use the standard biconcial/log with spectrum analyzer setup common to Open Area Testing. Sorry if I have over-generalized my statement in need of specific criteria, but at this point any information is better than none. Your consideration and thought in the manner is greatly appreciated. Kind regards, Steve Kuiper Aegis Labs, Inc. --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
