I have experienced good results by requesting the Part/Component molder to mold the plastic identification in the part/component.
Pryor McGinnis [email protected] -----Original Message----- From: Price, Ed <[email protected]> To: '[email protected]' <[email protected]> List-Post: [email protected] Date: Friday, September 17, 1999 11:04 PM Subject: FW: help > >Posted for [email protected] > > > > > > > > >:-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-) >Ed Price >[email protected] >Electromagnetic Compatibility Lab >Cubic Defense Systems >San Diego, CA. USA >619-505-2780 (Voice) >619-505-1502 (Fax) >Military & Avionics EMC Services Is Our Specialty >Shake-Bake-Shock - Metrology - Reliability Analysis >:-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-) > >> -----Original Message----- >> From: Linstrom, John (IndSys, GEFanuc, CDI) >> [SMTP:[email protected]] >> Sent: Friday, September 17, 1999 2:44 PM >> To: 'Price, Ed' >> Subject: RE: help >> >> >> My question: we have a UL mark on a box we build. One of the requirements >> that the auditors check is flammability of materials. 2 parts give us >> trouble - a molded bezel and a plex screen. Both are materials purchased >> elsewhere by our fabricators. UL says either assemble a 'paper trail' that >> shows continuous control of the materials, or use a 'recognized >> fabricator' (read buck$) to make our parts. Neither fab. house is >> recognized or wants to be. UL is VERY evasive about the required >> documents for the 'trail'. Any one have this experience - and succeed? >> Thanks- >> >> John Linstrom >> Computer Dynamics >> PH 864.281.7768 x266 >> FX 864.675.0106 >> [email protected] >> >> > >--------- >This message is coming from the emc-pstc discussion list. >To cancel your subscription, send mail to [email protected] >with the single line: "unsubscribe emc-pstc" (without the >quotes). For help, send mail to [email protected], >[email protected], [email protected], or >[email protected] (the list administrators). > > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
